SANIFLO Sanimarin 31 Electric Marine Macerating Toilet (12V)

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your SANIFLO Sanimarin 31 Electric Marine Macerating Toilet. The Sanimarin 31 is a compact, low-profile automatic toilet system designed for marine environments, featuring a stainless steel macerating blade and a control panel.

Keskeisiä ominaisuuksia ovat:

• Compact and efficient design suitable for limited spaces.
• Quiet operation with a soft-close seat.
• Powerful stainless steel macerating blade for waste processing.
• Dual flush modes (Eco and Normal) for water and energy efficiency.

Kuva 1.1: Edessä view of the SANIFLO Sanimarin 31 Electric Marine Macerating Toilet.

2. Turvallisuustiedot

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in product damage, property damage, or personal injury.

• Varmista, että virtalähde on irrotettu ennen asennus-, huolto- tai vianetsintätoimenpiteitä.
• This unit operates on 12V DC. Verify your vessel's electrical system matches this requirement.
• Installation should be performed by a qualified technician if you are unfamiliar with marine plumbing and electrical systems.
• Do not dispose of foreign objects (e.g., sanitary products, paper towels, wipes, plastics) into the toilet, as this can cause blockages and damage the macerator.
• Varmista asennusalueen asianmukainen ilmanvaihto.

3. Pakkauksen sisältö

Varmista pakkauksesta purkamisen yhteydessä, että kaikki osat ovat mukana ja vahingoittumattomia:

• Sanimarin 31 Electric Marine Macerating Toilet unit
• Ohjauspaneeli
• Pehmeästi sulkeutuva wc-istuin
• Asennuslaitteisto
• Käyttöohje

4. Asennus ja asennus

The Sanimarin 31 is designed for floor-mounted installation. Ensure adequate space and access for plumbing and electrical connections.

4.1. Mitat

Refer to the diagram below for product dimensions to ensure proper fit in your desired location.

Image 4.1: Dimensional drawing of the Sanimarin 31 toilet, showing height, width, and depth measurements.

4.2. Vesiliitäntä

• The toilet uses onboard freshwater or outside pressurized water.
• Minimum water supply pressure required is 25 PSI (1.7 bar).
• Recommended pump flow rate is 2.9 GPM.
• Connect the water inlet to a suitable freshwater supply line. A shutoff valve is recommended for maintenance.

4.3. Waste Discharge Connection

• The macerator can discharge waste up to 10 feet vertically or 100 feet horizontally.
• The discharge outlet is located at the top left rear of the toilet when viewed edestä.
• Use appropriate marine-grade discharge hose and fittings. A 1-1/4" Fernco adapter may be required for connection to your drain system.

4.4. Sähköliitäntä

• The unit requires a 12V DC power supply.
• Yhdistä omaan 25 amp piiri.
• Varmista, että kaikki sähköliitännät ovat tukevasti kiinni ja suojassa kosteudelta.

4.5. Asennus

• Secure the toilet to the floor using the provided mounting hardware.
• Ensure the toilet is stable and level after installation.

5. Käyttö

The Sanimarin 31 is operated via a control panel with distinct flush options.

Image 5.1: The Sanimarin 31 control panel with Eco, Normal, and Empty buttons.

5.1. Ohjauspaneelin toiminnot

• Virran merkkivalo: A light on the control panel indicates when the unit is powered.
• Täyden säiliön ilmaisin: An optional connection to your black water tank gauge can illuminate an indicator when the tank is full.
• ECO Flush: Initiates an economical flush using approximately 0.32 gallons of water.
• NORMAL Flush: Initiates a standard flush using approximately 0.63 gallons of water. The flush volume is adjustable up to 1 gallon.
• EMPTY Button: Activates the macerator to remove water from the bowl. This function is also used for maintenance procedures.

5.2. Flushing Procedure

1. Varmista, että yksikköön on kytketty virta.
2. Valitse joko ECO or NORMAALI flush button based on your requirement.
3. The macerator will activate, and water will enter the bowl to rinse and discharge waste.
4. Release the button once the flush cycle is complete and the bowl is clean.

6. Huolto

Regular maintenance ensures optimal performance and longevity of your Sanimarin 31 toilet.

6.1. Puhdistus

• Use mild, non-abrasive cleaners specifically designed for marine toilets. Avoid harsh chemicals, bleach, or abrasive pads, as these can damage the toilet's surfaces and internal components.
• Puhdista kulho ja sen ulkopinta säännöllisesti.
• For thorough cleaning, use the TYHJÄ button to remove water from the bowl before applying cleaner.

6.2. Talvivalmistelu

If the toilet will be exposed to freezing temperatures, proper winterization is essential to prevent damage.

• Flush the toilet with fresh water several times to clear any waste.
• Irrota vedensyöttö.
• Käytä TYHJÄ button to remove as much water as possible from the bowl and internal pump.
• Introduce non-toxic marine-grade antifreeze into the bowl and flush until antifreeze is visible in the discharge line.

7. Vianmääritys

This section addresses common issues you might encounter with your Sanimarin 31 toilet.

8. Tekniset tiedot

9. Takuu ja tuki

SANIFLO products are manufactured to high standards. For specific warranty details, please refer to the warranty card included with your product or visit the official SANIFLO website. EU spare part availability is typically 2 years.

For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts, please contact SANIFLO customer support. Contact information can be found on the SANIFLO websivustolla tai tuotepakkauksessa.

You can visit the SANIFLO Store for more information: SANIFLO Store