DAB E.SYBOX 230V vedenpainekorotusjärjestelmän käyttöohje

1. Johdanto

The DAB E.SYBOX is an integrated electronic water booster system designed for domestic and residential applications. This system provides constant water pressure while optimizing energy consumption. It is suitable for use with potable water in domestic plants, for gardening, and irrigation. The E.SYBOX can also be used to create groups of up to four pumps.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your E.SYBOX system. Please read it thoroughly before installation and keep it for future reference.

2. Turvallisuustiedot

WARNING: Before performing any operation on the pump, disconnect it from the main power supply.

• Varmista virtalähteen voltage matches the specifications of the E.SYBOX (230V).
• Asennuksen ja huollon saa suorittaa vain pätevä henkilöstö.
• Do not operate the pump with flammable or explosive liquids.
• Suojaa yksikköä jäätymiseltä.
• Varmista laitteen ympärillä asianmukainen ilmanvaihto ylikuumenemisen estämiseksi.
• Yksikön tulee olla kunnolla maadoitettu.

3. Pakkauksen sisältö

Varmista pakkauksesta purkamisen yhteydessä, että kaikki osat ovat mukana ja vahingoittumattomia:

• DAB E.SYBOX Water Booster System Unit
• Virtajohto
• Connection Pieces (e.g., 1" plastic unions)
• Käyttöopas (tämä asiakirja)

4. Asennus ja asennus

The E.SYBOX is designed for straightforward installation and requires no additional components for basic setup. It can be installed either vertically or horizontally.

4.1. Asennuspaikan valinta

Valitse sijainti, joka on:

• Protected from direct sunlight and extreme temperatures.
• In a closed space without a high level of air exchange, as the unit is water-cooled and quiet.
• Pääsy huoltoon.
• Near the water source and the distribution system.

4.2. Fyysinen asennus

1. Yksikön sijoittaminen: Place the E.SYBOX on a stable, level surface. The anti-vibration feet help reduce noise. The unit can be positioned vertically or horizontally.


Kuva 1: Etuosa view of the DAB E.SYBOX unit, showing the display and general form factor.

2. Liitännät vesilinjoille: Connect the inlet pipe from your water source to the suction port and the outlet pipe to your distribution system. Use the provided 1" plastic unions for secure connections. Ensure all connections are watertight.


Kuva 2: Takaosa view of the E.SYBOX, highlighting the water inlet and outlet connections.

3. Sähköliitäntä: Connect the power cord to a grounded 230V AC outlet. Ensure the power supply is stable and protected from surges.
4. Pumpun ilmaus (tarvittaessa): For initial startup or after maintenance, ensure the pump is filled with water before operation to prevent dry running. Refer to the display for priming instructions.

5. Käyttöohjeet

The E.SYBOX features an adjustable, high-resolution LCD display for easy operation and monitoring.

5.1. Ensimmäinen käynnistys

1. Once connected to power, the LCD display will illuminate.
2. Follow the on-screen prompts for initial setup, which may include language selection and basic pressure settings.

5.2. Halutun paineen asettaminen

The E.SYBOX allows you to set your desired water pressure. The system will then maintain this constant pressure by adjusting pump speed.

• Navigate through the LCD menu using the control buttons adjacent to the display.
• Locate the "Pressure Setting" option.
• Adjust the pressure value (e.g., in PSI or Bar) to your preference. The system can deliver up to 210 ft (approx. 90 PSI) of head.
• Confirm your selection. The system will automatically adjust to maintain this pressure.

Figure 3: E.SYBOX display showing operational parameters such as power consumption (360W), pressure (3 Bar / 43 PSI), and flow rate (3.2 GPM / 12 l/min).

5.3. Suorituskyvyn seuranta

The LCD display provides real-time statistics:

• Paine: Current system pressure.
• Virtausnopeus: Instantaneous water flow.
• Virrankäyttö: Energy consumption of the unit.
• Hälytykset/varoitukset: Notifications for any operational issues.

6. Huolto

Regular maintenance ensures the longevity and optimal performance of your E.SYBOX system.

6.1. Rutiinitarkastukset

• Silmämääräinen tarkastus: Periodically check for any leaks, unusual noises, or visible damage.
• Air Exchange: Ensure the area around the unit is not obstructed to allow for proper air circulation for the water-cooled motor.

6.2. Anturin puhdistus

Over time, sediment may accumulate and affect the flow sensors. The E.SYBOX comes with a tool for cleaning these sensors.

1. Katkaise virta: Always disconnect the unit from the power supply before any maintenance.
2. Locate Sensors: Refer to the detailed diagram in the full technical manual (if available) to locate the flow sensors.
3. Puhdas: Use the provided tool to carefully clean any accumulated sediment from the sensors.
4. Yhdistä uudelleen: Reassemble any removed parts and reconnect power.

6.3. Talvivalmistelu

If the unit is installed in an area subject to freezing temperatures, it must be drained to prevent damage.

• Katkaise virta.
• Drain all water from the pump and associated piping.
• Store in a frost-free environment if possible, or ensure complete drainage.

7. Vianmääritys

This section addresses common issues you might encounter with your E.SYBOX system.

Jos ongelma jatkuu näiden ratkaisujen kokeilemisen jälkeen, ota yhteyttä asiakastukeen.

8. Tekniset tiedot

9. Takuu ja tuki

9.1. Takuutiedot

DAB provides a limited warranty for the E.SYBOX 230V Water Booster System against defects in materials and workmanship under normal use and service. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, refer to the warranty card included with your product or visit the official DAB websivusto.

9.2. Asiakastuki

If you require technical assistance, have questions about installation, operation, or maintenance, or need to report a problem, please contact DAB customer support.

• Online-tuki: Visit the official DAB Pumps website for FAQs, technical documents, and contact forms.
• Puhelintuki: Refer to the contact information provided on the DAB website or your product packaging for regional support numbers.
• When contacting support, please have your product model (60161182) and serial number (if applicable) ready.