1. Johdanto
The Duronic DMUSB5X1 is a desk-mounted monitor arm designed to optimize your workspace. It features a gas spring mechanism for smooth, effortless adjustments, allowing you to position your monitor for optimal viewing comfort. This model also integrates a USB hub and audio ports for convenient connectivity directly at your desk.
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Duronic DMUSB5X1 monitor arm.
2. Turvallisuusohjeet
- Lue kaikki ohjeet huolellisesti ennen kokoamista ja käyttöä.
- Ensure your desk surface is strong enough to support the monitor arm and attached monitor(s).
- Do not exceed the maximum weight capacity of 8 kg (17.6 lbs) per arm.
- Ensure all screws and connections are securely tightened before use. Periodically check for tightness.
- Pidä lapset ja lemmikkieläimet poissa kokoontumisalueelta.
- Use only the provided hardware. If any parts are missing or damaged, contact Duronic customer support.
- Adjust the gas spring tension carefully to match your monitor's weight. Improper tension can cause the monitor to drop or spring up unexpectedly.
3. Pakkauksen sisältö
Varmista, että kaikki osat ovat mukana ennen kokoamisen aloittamista:
- Monitor Arm Assembly (Gas Spring Arm, Pole)
- Työpöytä Clamp Pohja
- VESA-kiinnityslevy
- USB and Audio Extension Cables
- Kiinnitystarvikkeet (erilaisia ruuveja, aluslevyjä, välikappaleita)
- Kuusiokoloavaimet kokoonpanoa ja säätöä varten
4. Asennus ja asennus
Follow these steps to install your Duronic DMUSB5X1 monitor arm:
- Kiinnitä työpöytä Clamp: Aseta työpöytä clamp base on your desk edge. Ensure the desk clamp is securely fastened to a stable surface. The clamp can accommodate desk thicknesses up to 68mm. Tighten the clamp ruuvaa tiukasti.
Kuva 4.1: Pöytäkaappiamp asennus.
- Assemble Arm to Pole: Insert the monitor arm onto the pole of the desk clamp. Secure it with the provided screws and Allen key.
- Kiinnitä VESA-levy näyttöön: Carefully place your monitor face down on a soft, clean surface. Attach the VESA mounting plate to the back of your monitor using the appropriate screws and spacers (if needed). The arm supports VESA 75x75mm and 100x100mm patterns.
Figure 4.2: VESA plate and arm dimensions.
- Kiinnitä näyttö varteen: Slide the monitor (with VESA plate attached) onto the arm's VESA head. Secure it with the locking mechanism or screws as per the specific design.
- Connect USB and Audio Cables: Connect the integrated USB and audio extension cables from the monitor arm base to the corresponding ports on your computer. This enables the convenient USB and audio ports on the arm's base.
Figure 4.3: Integrated USB and audio ports.
- Säädä kaasujousen kireyttä: The gas spring comes pre-tensioned. You may need to adjust it to match your monitor's weight. Use the provided Allen key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays in position when moved.
5. Käyttö ja säädöt
The Duronic DMUSB5X1 offers a wide range of adjustments for optimal viewing:
- Korkeuden säätö: The gas spring arm allows for smooth vertical movement. Gently push or pull the monitor to the desired height.
- Kallistaa: The VESA head allows tilting the monitor -90° (downwards) to +85° (upwards) to reduce glare and improve viewkulmat.
- Kääntyvä: The arm can swivel 180° left or right at the pole and at the arm joints, allowing you to share your screen or adjust its position.
- Kierto: The VESA plate allows for 360° rotation, enabling you to switch between landscape and portrait orientations.
Figure 5.1: Monitor arm adjustment ranges.
- Integrated USB and Audio Ports: Use the two USB 2.0 ports for connecting peripherals like keyboards, mice, or USB drives. The headphone and microphone jacks provide convenient access for audio devices.
6. Huolto
- Puhdistus: Pyyhi näytön varsi pehmeällä,amp liinalla. Vältä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa pintaa.
- Säännölliset tarkastukset: Tarkista säännöllisesti kaikki ruuvit ja liitokset varmistaaksesi, että ne ovat kireällä. Kiristä tarvittaessa uudelleen.
- Kaasujousen säätö: If your monitor's weight changes, or if the arm no longer holds its position correctly, re-adjust the gas spring tension as described in the setup section.
7. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Monitor does not stay in desired position (sags or springs up). | Incorrect gas spring tension. | Adjust the gas spring tension using the provided Allen key. Turn clockwise for heavier monitors, counter-clockwise for lighter monitors. |
| Monitor cannot be attached to the VESA plate. | Monitor VESA pattern is not compatible (not 75x75mm or 100x100mm). | Verify your monitor's VESA compatibility. An adapter may be required for non-standard patterns. |
| USB or audio ports on the arm base are not working. | Extension cables are not properly connected to the computer. | Ensure the USB and audio extension cables from the monitor arm base are securely plugged into the corresponding ports on your computer. |
| Käsivarsi tuntuu löysältä tai epävakaalta. | Työpöytä clamp is not tightened sufficiently or desk surface is unstable. | Kiristä pöydän kiinnitysruuvit uudelleenamp. Ensure the desk surface is stable and within the recommended thickness. |
8. Tekniset tiedot
- Malli: DMUSB5X1
- Merkki: Duronic
- Materiaali: Alumiini
- Näytön koon yhteensopivuus: 15–27 tuumaa (38–68 cm)
- Painokapasiteetti: Up to 8 kg (17.6 lbs) per arm
- VESA-yhteensopivuus: 75x75mm, 100x100mm
- Säädöt:
- Kallistus: -90 ° - + 85 °
- Kääntö: 180°
- Kierto: 360°
- Työpöytä Clamp Paksuus: Jopa 68 mm
- Integroidut portit: 2 x USB 2.0, 1 x Headphone Jack, 1 x Microphone Jack
9. Takuu ja tuki
Takuutiedot: For detailed warranty terms and conditions, please refer to the manufacturer's official websivustolla tai tuotepakkauksen mukana toimitetussa takuukortissa.
Asiakastuki: If you encounter any issues or have questions regarding your Duronic DMUSB5X1 monitor arm, please visit the official Duronic website for support resources, FAQs, and contact information for their customer service team.