1. Johdanto
This manual provides essential information for the safe and efficient operation of your ANSMANN Future 3in1 LED Flashlight. Please read these instructions carefully before using the product and retain them for future reference.
Figure 1: ANSMANN Future 3in1 LED Flashlight overview, highlighting its compact size, IP54 splashproof rating, professional LED, and aircraft-grade aluminum construction.
2. Turvallisuusohjeet
Noudata seuraavia turvaohjeita loukkaantumisten tai tuotteen vaurioitumisen välttämiseksi:
- Do not look directly into the LED beam. The intense light can cause temporary vision impairment or eye damage.
- Ensure batteries are inserted with correct polarity (+/-). Incorrect insertion can damage the device.
- Älä sekoita vanhoja ja uusia paristoja tai erityyppisiä paristoja.
- Poista paristot vuotojen estämiseksi, jos taskulamppua ei käytetä pitkään aikaan.
- This flashlight is IP54 rated, meaning it is protected against dust ingress and splashing water. It is not designed for submersion in water.
- Pidä poissa lasten ulottuvilta.
3. Tuote ohiview
The ANSMANN Future 3in1 LED Flashlight features a robust aluminum housing and offers three distinct lighting functions:
- Main LED Beam: Located at the front, with adjustable focus.
- Side Work Light: A bright white LED panel on the side for area illumination.
- Side Signal Light: A red LED panel on the side for warning or signaling purposes.
Additional features include a powerful magnetic base for hands-free operation and a sturdy pocket clip.
Figure 2: The seamless optic focusing system allows for quick adjustment of the light beam.
Figure 3: The powerful magnetic base enables convenient hands-free operation by attaching to metal surfaces.
4. Asennus
4.1. Akun asennus
- Unscrew the end cap of the flashlight by turning it counter-clockwise.
- Insert three (3) AAA 1.5V alkaline batteries into the battery holder, ensuring correct polarity (+ and -) as indicated inside the holder.
- Carefully reinsert the battery holder into the flashlight body.
- Screw the end cap back on clockwise until it is securely tightened.
Figure 4: Battery compartment with the end cap removed, showing the battery holder for three AAA batteries.
Figure 5: The flashlight requires three AAA batteries for operation.
5. Käyttöohjeet
5.1. Virran kytkentä/katkaisu ja tilan valinta
The flashlight features a single button located on the end cap to cycle through its functions:
- Ensimmäinen painallus: Activates the main LED beam.
- Toinen painallus: Switches to the white side work light.
- Kolmas painos: Switches to the red side signal light.
- Neljäs painos: Turns the flashlight off.
- Quick Off: To turn off the flashlight from any mode, press and hold the button for approximately 2 seconds.
Figure 6: The main LED beam provides powerful illumination for various tasks.
Figure 7: The white side work light is ideal for close-range illumination and hands-free tasks.
Figure 8: The red side signal light can be used for emergencies or to maintain night vision.
5.2. Tarkennuksen säätö
To adjust the focus of the main LED beam, simply slide the head of the flashlight forward or backward. Sliding it forward narrows the beam for a focused spot, while sliding it backward widens the beam for a broad floodlight.
6. Huolto
- Puhdistus: Pyyhi taskulampun runko pehmeällä,amp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Akun hoito: Always replace all three AAA batteries simultaneously with new, identical batteries. Do not attempt to recharge non-rechargeable batteries.
- Varastointi: If the flashlight will not be used for an extended period, remove the batteries to prevent potential leakage and damage. Store in a cool, dry place.
7. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Taskulamppu ei syty. | Paristot ovat tyhjentyneet tai ne on asetettu väärin. | Vaihda paristot uusiin varmistaen oikean napaisuuden. |
| Valo on himmeä tai välkkyy. | Paristot ovat vähissä. | Vaihda kaikki paristot uusiin. |
| Mode switching is inconsistent. | Painiketta ei paineta tarpeeksi lujasti tai nopeasti. | Ensure firm and distinct presses of the power button. |
8. Tekniset tiedot
| Merkki | ANSMANN |
| Mallinumero | 1600-0137 |
| Mitat (P x L x K) | 12.55 x 3.3 x 3.3 cm |
| Paino | 183 g |
| Virtalähde | 3 x AAA 1.5V Alkaline Batteries (included) |
| Valon lähde | LED |
| Luminous Flux (Main Beam) | 180 lumenia |
| Säteen etäisyys | Jopa 130 metriä |
| Ajoaika | Jopa 11 tuntia |
| Tehoa | 3 wattia |
| IP-luokitus | IP54 (roisketiivis) |
| Materiaali | Lentokonekäyttöön tarkoitettu alumiini |
| Erikoisominaisuudet | Stepless focus, White side work light, Red side signal light, Magnetic base, Pocket clip |
Figure 9: Product packaging illustrating key features and the 3-year warranty.
9. Takuu ja tuki
9.1. Takuutiedot
The ANSMANN Future 3in1 LED Flashlight is covered by a 3 vuoden valmistajan takuu ostopäivästä lukien. Tämä takuu kattaa materiaali- ja valmistusvirheet normaalissa käytössä. Säilytä ostokuitti takuuvaatimuksia varten.
9.2. Asiakastuki
For technical support, warranty claims, or any questions regarding your ANSMANN Future 3in1 LED Flashlight, please contact ANSMANN customer service:
- Sähköposti: info@ansmann.de
- EPREL-tuotetiedot: https://eprel.ec.europa.eu/qr/721168