Johdanto
Thank you for choosing the Child Craft Bristol Compact Crib. This manual provides essential information for the safe assembly, operation, and maintenance of your crib. Please read all instructions carefully before assembly and keep this manual for future reference.
The Child Craft Bristol Compact Crib features a low-profile design for easy infant access, a durable wood construction, and includes a 3-inch foam mattress. It is equipped with ultra-quiet casters, two of which are locking, for improved maneuverability and stability.
Tärkeitä turvallisuustietoja
VAROITUS: Näiden varoitusten ja kokoamisohjeiden noudattamatta jättäminen voi johtaa vakavaan loukkaantumiseen tai kuolemaan.
- Read all instructions before using the crib. Keep instructions for future use.
- Älä käytä tätä pinnasänkyä, jos et voi tarkasti noudattaa mukana tulevia ohjeita.
- The crib, including side rails, must be fully erected prior to use.
- Älä aseta pinnasänkyä ikkunan lähelle, missä kaihtimien tai verhojen narut voivat kuristaa lapsen.
- Älä ripusta naruja tai leluja pinnasängyn yläpuolelle.
- Do not place the crib near heat sources, windows, or other furniture.
- Discontinue use of the crib when a child begins to climb out or reaches the height of 35 inches (89 cm).
- Check this product for damaged hardware, loose joints, missing parts, or sharp edges before and after assembly and frequently during use. Do not use the crib if any parts are missing or broken. Contact Child Craft for replacement parts and instructional literature if needed. Do not substitute parts.
- Vauvat voivat tukehtua pehmeisiin vuodevaatteisiin. Älä koskaan lisää tyynyä tai peittoa. Älä koskaan laita ylimääräistä pehmustetta vauvan alle.
- SIDS-riskin vähentämiseksi lastenlääkärit suosittelevat terveiden vauvojen asettamista selälleen nukkumaan, ellei lääkäri toisin neuvo.
- Varmista aina lapsesi jatkuvan turvallisuuden edellyttämä valvonta.
- The mattress supplied with this crib is 3 inches thick. Ensure any replacement mattress used is at least 3 inches thick and fits snugly without gaps.
Pakkauksen sisältö
Before beginning assembly, ensure all parts are present. If any parts are missing or damaged, do not proceed with assembly. Contact Child Craft customer support for assistance.
- Crib Frame Components (sides, ends, mattress support)
- Tarvikepaketti (ruuvit, pultit, kuusiokoloavain)
- 4 x 3-inch Caster Wheels (2 locking, 2 non-locking)
- 1 x 3-inch Foam Mattress
- Käyttöohje
Asennus ja kokoonpano
Assembly typically requires two adults. Follow the steps below carefully. Do not overtighten fasteners.
- Pura komponentit: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratching. Verify all package contents are present.
- Kiinnitä pyörät: Insert the four 3-inch caster wheels into the designated holes at the bottom of each leg. Ensure the two locking casters are installed on the same side for easier access. Press firmly until they click into place.
- Assemble Crib Frame: Connect the crib ends to the side rails using the provided hardware. Ensure all connections are secure but do not fully tighten until the entire frame is assembled.
- Patjan tuen asentaminen: Position the mattress support frame within the crib. The mattress support can be adjusted to two different height positions. Choose the appropriate height based on the child's age and development. Secure the mattress support to the crib frame using the provided hardware.
- Lopullinen kiristys: Once all components are assembled, carefully tighten all screws and bolts. Do not overtighten.
- Aseta patja: Insert the 3-inch foam mattress into the crib. Ensure it fits snugly without any gaps between the mattress and the crib sides.
Kuva: Lähikuva view of a crib leg with an attached caster wheel. This illustrates how the caster wheels are installed at the base of the crib legs.
Image: Fully assembled Child Craft Bristol Compact Crib in natural wood finish, shown with the included foam mattress. This provides a complete view tuotteesta kokoamisen jälkeen.
Käyttöohjeet
Patjan korkeuden säätö
The mattress support can be set to two different heights. The higher position is for infants, providing easier access for caregivers. The lower position is for older infants and toddlers who can push up on their hands and knees or stand, to prevent them from climbing out.
- Irrota patja pinnasängystä.
- Carefully detach the mattress support from the crib frame by unscrewing the fasteners.
- Re-attach the mattress support to the desired height position, ensuring all fasteners are securely tightened.
- Vaihda patja.
Pyöräpyörien käyttö
The crib is equipped with four 3-inch caster wheels for easy movement. Two of these casters are locking to secure the crib in place.
- To Move the Crib: Ensure both locking casters are in the unlocked position. Gently push the crib to its desired location.
- To Secure the Crib: Once the crib is in position, engage the locks on the two locking casters by pressing down on the lever. Verify the crib is stable and does not move.
Huolto ja hoito
- Puhdistus: Pyyhi pinnasängyn pinnat mainoksellaamp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish or materials.
- Laitteiston tarkistus: Regularly check all screws, bolts, and fasteners to ensure they are tight and secure. Loose hardware can pose a safety hazard.
- Varastointi: If storing the crib, ensure it is clean and dry. Store in a climate-controlled environment to prevent warping or damage to the wood.
- Patjan hoito: The foam mattress can be spot cleaned with a mild soap and water solution. Allow to air dry completely before placing back in the crib.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Pinnasänky tuntuu heiluvalta tai epävakaalta. | Löysä laitteisto. | Tarkista ja kiristä kaikki ruuvit ja pultit. Älä kiristä liikaa. |
| Pyörät eivät pyöri tasaisesti. | Debris in wheels or casters not fully inserted. | Clean any debris from the wheels. Ensure casters are fully seated in the legs. |
| Mattress does not fit snugly. | Incorrect mattress size or improper assembly. | Ensure the correct mattress (3-inch foam mattress included) is used. Recheck crib assembly to ensure all parts are correctly aligned. |
| Crib makes squeaking noises. | Loose joints or friction between wood parts. | Tighten all hardware. Apply a small amount of paraffin wax or silicone spray to contact points if necessary. |
Tekniset tiedot
- Mallinumero: F99040.04 XNUMX
- Merkki: Lasten askartelu
- Materiaali: Puu
- Väri: Natural (Beige finish)
- Mitat koottuna (P x L x K): 39 cm P x 26.25 cm L x 38 cm K
- Tuotteen paino: 52 kiloa
- Enimmäispainon suositus: 50 kiloa
- pyörät: 4 x 3-inch ultra-quiet casters (2 locking)
- Patja: Includes 3-inch foam mattress
- Patjan tuki: Adjustable to two positions
- Turvallisuustodistukset: Exceeds CPSC and ASTM standards, verified by Baby Safety Alliance.
Takuutiedot
Child Craft products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or contact Child Craft customer support directly. Typically, warranties cover manufacturing defects under normal use.
Asiakastuki
If you have any questions, require replacement parts, or need assistance with your Child Craft Bristol Compact Crib, please contact the manufacturer or your retailer.
- Valmistaja: Säätiöt
- Merkki: Lasten askartelu
- Refer to the product packaging or the Child Craft official websivustolta ajantasaisimmat yhteystiedot.
