Johdanto
The Orange Amp Detonator is a buffered ABY switcher pedal designed for electric guitarists who wish to use two amplifiers simultaneously or switch between them without signal degradation or ground hum issues. This active pedal provides transformer-isolated outputs and buffered signals to maintain tonal integrity across complex setups. It addresses common problems associated with passive ABY boxes, offering a robust and transparent solution for advanced amplifier routing.
Ominaisuudet
- Active A/B/Y Switch for Electric Guitar
- Transformer-isolated Output to eliminate ground hum
- Buffered Outputs for consistent signal strength
- Polarity Switch to correct phase issues between amppelastajia
Säätimet ja liitännät
The Amp Detonator features intuitive controls and robust connections for seamless integration into your guitar rig.
Kuva 1: Edessä view of the Orange Amp Detonator pedal, showing the 'A - B' and 'BOTH' footswitches, the 'PHASE' button, and the 'BUFFERED ABY' indicator.
- Tuloliitäntä: Connect your guitar or the output of your last pedal in the signal chain here.
- Output A Jack: Connect to your first amplifier'in panos.
- Output B Jack: Connect to your second amplifier's input. This output is transformer-isolated.
- 'A - B' Footswitch: Toggles between Output A and Output B.
- 'BOTH' Footswitch: Engages both Output A and Output B simultaneously.
- 'PHASE' Button: Corrects phase discrepancies between amplifiers when using both outputs.
- BUFFERED ABY Indicator: LED light indicating the active output mode (A, B, or BOTH).
- DC 9V tulo: Power input for the pedal.
Kuva 2: Kulma view of the pedal, highlighting the input and output jacks on the sides.
Kuva 3: Takaosa view of the pedal, displaying the power input and product serial number information.
Asennus
Follow these steps to set up your Orange Amp Detonator pedal:
- Virtaliitäntä: Connect a 9V DC power supply (center negative) to the DC 9V input jack on the pedal. The pedal can also run on 9V or 12V power for increased headroom.
- Kitaratulo: Connect your guitar (or the output of your last effect pedal) to the INPUT jack on the Amp Detonator.
- Amplifier-liitännät:
- Connect the OUTPUT A jack to the input of your first ampelävämpi.
- Connect the OUTPUT B jack to the input of your second ampelävämpi.
- Alkutarkastus: Ensure all connections are secure and power is supplied to the pedal and amppelastajia.
Video 1: Virallinen tuotevideo-esittelyasing the Orange Amp Detonator Buffered ABY Switcher Pedal's features and operation.
Käyttöohjeet
The Amp Detonator offers flexible routing options:
- Valitseminen Amplifier A or B: Press the 'A - B' footswitch to toggle between sending your signal to Ampelinkaaren A tai Amplifier B. The BUFFERED ABY indicator will change color to show which output is active (e.g., green for A, red for B).
- Using Both Amppelastajat: Press the 'BOTH' footswitch to send your signal to both Amppelastaja A ja Amplifier B simultaneously. The BUFFERED ABY indicator will typically show a distinct color (e.g., blue) to indicate this mode.
- Vaiheen korjaus: If you experience phase cancellation or a thin sound when using both amplifiers, press the 'PHASE' button. This will invert the phase of one of the outputs (usually Output B) to bring the amplifiers back into phase, resulting in a fuller sound.
- Switching Logic: The pedal remembers the last selected single output (A or B) when you disengage the 'BOTH' mode. For example, if you were on 'A', then engaged 'BOTH', and then disengaged 'BOTH', the pedal will return to 'A'.
Tehovaatimukset
The Orange Amp Detonator requires a 9V DC power supply (center negative). It can also operate with a 12V DC power supply for increased headroom, which may be beneficial for certain setups or to prevent clipping with high-output instruments. The current draw is approximately 12 milliamps, making it highly efficient for battery operation if desired, though a power adapter is recommended for consistent performance.
Huolto
- Puhdistus: Puhdista polkimen ulkopinta pehmeällä, kuivalla liinalla. Vältä hankaavia puhdistusaineita tai liuottimia.
- Varastointi: Säilytä poljinta kuivassa paikassa, poissa äärimmäisistä lämpötiloista ja kosteudesta.
- Kaapelihuolto: Always use high-quality instrument cables and ensure they are not kinked or damaged.
- Virtalähde: Use only the recommended power supply to prevent damage to the unit.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei ääntä | Incorrect connections, no power, faulty cables. | Check all cable connections, ensure power supply is connected and functional, test with different cables. |
| Hurina/surina | Ground loop, faulty power supply, interference. | Ensure Output B's transformer isolation is functioning. Try a different power outlet or isolated power supply. Check for nearby interference sources. |
| Thin/Weak sound in 'BOTH' mode | Phase cancellation between amppelastajia. | Press the 'PHASE' button to invert the phase of one output. |
| LED ei syty | Ei virtaa. | Verify power supply connection and functionality. |
Tekniset tiedot
- Tuotteen paino: 1.54 puntaa (0.7 kiloa)
- Tuotteen mitat: 6 x 3 x 5 tuumaa
- Tuotteen mallinumero: Amp Detonator
- Liittimen tyyppi: 1/4 tuuman ääni
- Laitteiston käyttöliittymä: 1/4 tuuman ääni
- Signaalin muoto: Analoginen
- Virtalähde: Akkukäyttöinen, johdollinen sähkö
- Voitage: 9 Volts (can also use 12V for more headroom)
- Ampkorotus: 300 miljoonaaamps (typical draw is 12mA)
Takuu ja tuki
This Orange product is covered by a limited warranty against defects in materials and workmanship. For detailed warranty information, product registration, or technical support, please visit the official Orange Amplifiointi websivustolta tai ota yhteyttä valtuutettuun jälleenmyyjään. Säilytä ostokuitti ostotodistuksena.
For further assistance, please refer to the official Orange websivusto: www.oranssiamps.com