Canon GI790M

Canon PIXMA GI790 Magenta Ink Bottle User Manual

Model: GI790M

Johdanto

This manual provides essential instructions for the safe and effective use of your Canon PIXMA GI790 Magenta Ink Bottle. This ink is designed for use with Canon PIXMA G-series inkjet printers, ensuring optimal print quality and printer longevity. Please read this manual thoroughly before use.

Yhteensopivat tulostinmallit: G1010, G2000, G2012, G3000, G3010, G3012, G4010.

Pakkauksen sisältö

  • 1 x Canon PIXMA GI790 Magenta Ink Bottle

Setup and Ink Refilling

Follow these steps to correctly refill your Canon PIXMA G-series printer's magenta ink tank.

  1. Valmistele tulostin: Ensure your printer is powered on. Open the ink tank cover on your printer. Locate the magenta ink tank.
  2. Avaa mustepullo: Carefully twist off the cap of the Canon GI790 Magenta Ink Bottle. Do not squeeze the bottle.
  3. Canon GI790 Magenta Ink Bottle with cap removed, ready for refilling

    Image: Canon GI790 Magenta Ink Bottle with its cap removed, showing the nozzle designed for spill-free refilling.

  4. Refill the Ink Tank: Align the nozzle of the ink bottle with the inlet of the magenta ink tank. Insert the bottle firmly. The ink will flow automatically into the tank. Do not squeeze the bottle.
  5. Näytön mustetaso: Observe the ink tank to ensure it fills to the upper limit line. Stop refilling once the tank is full.
  6. Remove and Recap: Gently remove the ink bottle from the tank. Recap the ink bottle securely if there is any remaining ink. Close the ink tank cover on your printer.
  7. Initial Setup (if applicable): If this is the first time refilling, or if prompted by the printer, follow any on-screen instructions on your printer's display or computer.
Canon GI790 Magenta Ink Bottle

Image: A single Canon GI790 Magenta Ink Bottle, illustrating its design and color.

Käyttöohjeet

Once the ink tank is refilled, your printer is ready for use. Ensure your printer drivers are installed and updated for optimal performance.

  • Tulostus: Send print jobs from your computer or device as usual. The printer will draw ink from the refilled tank.
  • Mustetason valvonta: Regularly check the ink levels in your printer's tanks, either visually or through your printer's software utility. Refill the ink before it drops below the lower limit line to prevent air from entering the ink tubes.
  • Sivun tuotto: This Magenta ink bottle is designed to yield approximately 7000 prints. Actual yield may vary significantly based on content of printed pages, print settings, temperature, and humidity.

Huolto

  • Varastointi: Store unused ink bottles upright in a cool, dark place, away from direct sunlight and extreme temperatures. Keep out of reach of children.
  • Aito muste: Always use genuine Canon ink bottles. Using counterfeit or non-genuine ink can harm your printer and may void its warranty.
  • Tulostuspään puhdistus: If print quality degrades (e.g., streaks, faded colors), perform a print head cleaning cycle through your printer's maintenance utility. Refer to your printer's manual for specific instructions.

Vianetsintä

If you encounter issues after refilling or during printing, consider the following:

  • Muste ei virtaa: Ensure the ink bottle nozzle is correctly seated in the ink tank inlet. Do not squeeze the bottle; the ink flows by gravity. Check for any blockages in the tank inlet.
  • Huono tulostuslaatu:
    • Verify that the ink tank is sufficiently filled.
    • Perform a print head cleaning and nozzle check from your printer's utility software.
    • Ensure you are using genuine Canon ink.
  • Tulostin ei tunnista mustetta: This ink bottle is a refill for an ink tank system, so the printer typically does not "recognize" the bottle itself. If the printer indicates low ink after refilling, ensure the tank was filled above the lower limit line and that the ink tank cover is properly closed.
  • Roiskeet: In case of ink spills, wipe immediately with a damp liinaa. Muste voi tahriintua.

For printer-specific errors or complex issues, refer to your Canon printer's instruction manual or contact Canon customer support.

Tekniset tiedot

Mallin nimiPIXMA GI790M
MerkkiCanon
Musteen väriMagenta
Musteen tyyppiDye-based
Sivun tuottoApprox. 7000 prints (ISO/IEC 24711 standard)
Yhteensopivat laitteetCanon PIXMA G1010, G2000, G2012, G3000, G3010, G3012, G4010
Tuotteen paino300 grammaa
Tuotteen mitat (S x L x K)6S x 6L x 15K senttimetriä
AlkuperämaaJapani

Takuutiedot

This Canon PIXMA GI790 Magenta Ink Bottle comes with a 7-day carry-in warranty from the date of purchase. This warranty covers manufacturing defects only. Please retain your purchase receipt as proof of purchase.

The warranty does not cover damage resulting from misuse, improper storage, or the use of non-genuine ink products.

Asiakastuki

For product-related queries, technical assistance, or warranty claims, please contact Canon customer support:

  • Puhelin: 1860 180 3366
  • Aukioloajat: Monday to Friday, 9:30 AM - 5:30 PM (IST)
  • Valmistajan yhteystiedot: Canon Inc., 3-30-2, Shimomaruko, Ohta-ku, Tokyo 146-8501, Japan
  • Importer Contact Information: Canon India Pvt Limited. 214-218, 2nd floor, Narain Manzil, Barakhamba Road, Connaught Place, New Delhi-110001, India

Pidä tuotetiedot ja ostotiedot käsillä, kun otat yhteyttä tukeen.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.