Fengda FD-196A Professional Airbrush Compressor User Manual

1. Johdanto

Thank you for choosing the Fengda FD-196A Professional Airbrush Compressor. This oil-free mini compressor is designed for precision airbrush applications, featuring an integrated 3.5-liter air tank and a pressure regulator with a filter and manometer. Its quiet operation and portable design make it suitable for various uses, including airbrushing, cosmetic studios, nail art, tattoo applications, and general hobby work. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your compressor.

2. Turvallisuusohjeet

Please read and understand all safety instructions before operating the compressor. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Sähköturvallisuus: Ensure the compressor is connected to a grounded power outlet with the correct voltage (220-240 V / 50 Hz). Do not operate the compressor with a damaged power cord or plug. Keep the power cord away from heat, oil, sharp edges, or moving parts.
• Paineturvallisuus: Never exceed the maximum operating pressure of 6 bars (87 PSI). Do not tamper with the safety/purge valve. Always release air pressure from the tank before performing maintenance or disconnecting accessories.
• Ilmanvaihto: Operate the compressor in a well-ventilated area. Ensure adequate airflow around the unit to prevent overheating. Do not cover the compressor during operation.
• Henkilökohtaiset suojavarusteet: Wear appropriate eye and respiratory protection when airbrushing.
• Lapset ja sivulliset: Keep children and bystanders away from the operating compressor and airbrushing area.
• Käyttötarkoitus: Use the compressor only for its intended purpose as an air source for airbrushing and similar applications. Do not use it for breathing air supply.
• Huolto: Irrota aina virtalähde ennen huolto- tai puhdistustöitä.
• Ylikuumenemissuoja: The compressor is equipped with automatic overheat protection. If the unit shuts down due to overheating, allow it to cool down completely before restarting.

3. Pakkauksen sisältö

Carefully unpack the compressor and check for any damage. Ensure all items listed below are present.

• 1x Fengda FD-196A Airbrush Compressor with Air Tank
• 1x Pressure Regulator with Filter and Manometer
• 1x virtajohto
• 1x käyttöopas

Figure 3.1: Compressor as received in its protective packaging.

4. Tuote ohiview

Familiarize yourself with the main components of your Fengda FD-196A compressor.

Kuva 4.1: Etuosa view of the Fengda FD-196A Airbrush Compressor with its protective metal case.

Figure 4.2: Compressor body without the metal case, illustrating the dual-piston design, air tank, and connection points.

• Ilmasäiliö: 3.5-liter capacity, ensures consistent air pressure and reduces compressor cycling.
• Paineensäädin: Allows adjustment of output air pressure.
• Suodattaa: Integrated into the pressure regulator to remove moisture and particles from the air.
• Painemittari: Displays the current output air pressure.
• Safety/Purge Valve: Located on the air tank for safety and draining condensation.
• Virtakytkin: Controls the compressor's power.
• Ilmanpoistoaukko: G 1/8" connection for air hose.

5. Asennus

1. Sijoitus: Place the compressor on a stable, level surface in a well-ventilated area. Ensure there is sufficient space around the unit for airflow.
2. Attach Pressure Regulator: Screw the pressure regulator assembly onto the air outlet port of the compressor. Hand-tighten firmly.
3. Liitä ilmaletku: Connect your airbrush hose (not included, typically 1/8" fitting) to the output of the pressure regulator. Ensure a secure connection to prevent air leaks.
4. Virtaliitäntä: Plug the power cable into the compressor's power inlet, then into a suitable grounded 220-240V / 50Hz electrical outlet.

6. Käyttöohjeet

1. Virta päälle: Flip the power switch to the "ON" position. The compressor will start to fill the air tank. The manometer will show the increasing-paine.
2. Automaattinen toiminta: The compressor features automatic start/stop functionality. It will automatically stop when the tank pressure reaches approximately 4 BAR (57 PSI) and restart when the pressure drops to approximately 3 BAR (43 PSI).
3. Lähtöpaineen säätö:
   • Turn the knob on the pressure regulator to adjust the desired working pressure for your airbrush.
   • The manometer will display the regulated output pressure.
   • Once the desired pressure is set, you can lock the knob (if applicable) to prevent accidental changes.
4. Continuous Mode (Optional): This compressor may offer a second mode where it operates continuously and stops at a higher pressure (e.g., 6 BAR). Consult your specific unit's markings or included manual for details on activating this mode, if available. This mode is generally for applications requiring higher, sustained pressure, not typical airbrushing.
5. Virta pois: After use, turn off the power switch. Disconnect the airbrush and release any remaining pressure from the air tank by briefly opening the safety/purge valve or by using the airbrush until the pressure gauge reads zero.

7. Huolto

Säännöllinen huolto varmistaa kompressorisi pitkän käyttöiän ja optimaalisen suorituskyvyn. Irrota aina virta ennen huoltoa.

• Tyhjennysveden kondenssi: The air tank accumulates condensation. Regularly drain the water from the air tank using the safety/purge valve at the bottom of the tank. This prevents rust and ensures clean, dry air.
• Puhdas ilmansuodatin: The pressure regulator includes an air filter. Periodically check and clean this filter to ensure proper airflow and prevent contaminants from reaching your airbrush. If the compressor has internal cylinder filters, these should also be checked and cleaned as per the manufacturer's instructions (e.g., by unscrewing and cleaning the metallic mesh filters).
• Yleinen puhdistus: Keep the exterior of the compressor clean and free of dust. Ensure ventilation openings are unobstructed.
• Öljytön muotoilu: This compressor is oil-free and does not require lubrication. Do not attempt to add oil to any part of the compressor.

8. Vianmääritys

9. Tekniset tiedot

10. Takuu ja tuki

Specific warranty terms and conditions for the Fengda FD-196A compressor may vary by region and retailer. Please refer to the warranty information provided at the time of purchase or contact your retailer for details regarding warranty coverage and claims.

For technical support or inquiries not covered in this manual, please contact the manufacturer or your authorized dealer.