Fengda FD-196 Mini Airbrush Compressor User Manual

1. Johdanto ja tuotekatsausview

The Fengda FD-196 is an oil-free, dual-piston mini airbrush compressor designed for a wide range of applications, from hobbyist model painting to professional nail art and cosmetics. It features a 3.5-liter air tank, automatic stop function, and a maximum pressure of 6 bar, ensuring consistent and pulsation-free air delivery. Its quiet operation and integrated water filter and pressure regulator make it a versatile and reliable tool.

Tärkeimmät ominaisuudet:

• Oil-free dual-piston design.
• 3.5L air tank for stable pressure.
• Automatic start/stop function (Level 1: 2.8 bar start, 4 bar stop).
• Maximum pressure of 6 bar (Level 2).
• Low noise level (approximately 45-55 dB).
• Integrated pressure regulator with manometer and water filter.
• Ylikuumenemissuoja.
• Supports simultaneous operation of two airbrushes.

Kuva 1: Kaiken kaikkiaan view of the Fengda FD-196 Mini Airbrush Compressor, showing the main unit, air tank, pressure regulator, and air outlets.

Figure 2: Close-up of the solenoid valve, which contributes to the smooth start-up of the compressor.

2. Turvallisuusohjeet

Please read all safety instructions carefully before operating the compressor. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the compressor is placed on a stable, level surface in a well-ventilated area.
• Do not operate the compressor near flammable liquids, gases, or dust.
• Varmista virtalähteen voltage matches the specifications on the compressor's label (220 Volts).
• Never touch the compressor with wet hands or while standing in water.
• Unplug the compressor from the power outlet before performing any maintenance, cleaning, or when not in use.
• Do not modify the compressor or its components. Use only original replacement parts.
• Pidä lapset ja lemmikit poissa käynnissä olevan kompressorin läheltä.
• Älä suuntaa ilmavirtaa ihmisiin tai eläimiin.
• Regularly drain condensation from the air tank to prevent corrosion and maintain performance.
• The compressor is equipped with an overheat protection system. If it shuts down due to overheating, allow it to cool down before restarting.
• The safety valve is designed to release pressure if it exceeds 6 bar. Do not tamper with or block this valve.

Kuva 3: Lähikuva view of the safety labels and the drain valve located at the bottom of the air tank. Always observe safety warnings and drain condensation regularly.

3. Mukana olevat osat

Pura pakkausta pakkauksesta ja tarkista, että kaikki seuraavat osat ovat mukana:

• 1x Fengda FD-196 Airbrush Compressor with 3.5L Air Tank
• 1x Pressure Regulator Outlet with Integrated Filter and Manometer
• 1x virtajohto
• 1x Käyttöohje (tämä asiakirja)

Kuva 4: Esimample of the protective styrofoam packaging used to secure the compressor during transport. Please ensure all components are removed from packaging before setup.

4. Asennus

1. Purkaminen: Carefully remove the compressor and all accessories from the packaging. Inspect for any damage that may have occurred during transit.
2. Sijoitus: Position the compressor on a firm, level, and stable surface. Ensure there is adequate ventilation around the unit to prevent overheating. Keep it away from direct sunlight, heat sources, and moisture.
3. Attach Pressure Regulator: Screw the pressure regulator outlet (with filter and manometer) onto the designated air outlet port of the compressor. Ensure it is hand-tightened securely to prevent air leaks.
4. Connect Airbrush Hose: Connect your airbrush hose to the outlet of the pressure regulator. The hose fitting diameter is typically 1/8".
5. Virtaliitäntä: Ensure the compressor's power switch is in the "OFF" position. Plug the power cable into a grounded electrical outlet (220 Volts).

5. Käyttöohjeet

The FD-196 compressor features a dual-level switch for flexible operation modes.

1. Virta päälle: Flip the main power switch to the desired operating level.
2. Toimintatilat:
   • Level 1 (Automatic Stop Mode): In this mode, the compressor will automatically start when the pressure drops to 2.8 bar and stop when it reaches 4 bar. This mode is ideal for most airbrushing tasks, providing consistent pressure and reducing wear on the motor.
   • Level 2 (Maximum Pressure Mode): In this mode, the compressor will run continuously until it reaches its maximum pressure of 6 bar. A safety valve will automatically release pressure if it exceeds 6 bar. This mode is suitable for tasks requiring higher, sustained pressure.
3. Paineen säätö: Use the knob on the pressure regulator to adjust the working pressure. The manometer will display the current output pressure. Adjust the pressure according to your airbrush and paint requirements. The effective continuous working pressure range is 0.35 to 2.5 bar.
4. Ylikuumenemissuoja: The compressor is equipped with thermal overload protection. If the unit becomes too hot during prolonged use, it will automatically shut down. Allow it to cool down completely before attempting to restart.
5. Dual Airbrush Support: The compressor is designed to support two airbrushes operating simultaneously, provided the combined air demand does not exceed the compressor's capacity.
6. Virta pois: After use, switch the compressor to the "OFF" position and unplug it from the power outlet.

Figure 5: Close-up of the main power switch, which allows selection between automatic stop mode (Level 1) and maximum pressure mode (Level 2).

6. Huolto

Säännöllinen huolto varmistaa kompressorisi pitkän käyttöiän ja optimaalisen suorituskyvyn.

• Tyhjennysveden kondenssi: After each use, or at least daily, drain any accumulated condensation from the air tank. This is crucial to prevent internal corrosion. Locate the drain valve at the bottom of the air tank (refer to Figure 3), place a container underneath, and open the valve until all water is expelled. Close the valve securely afterward.
• Puhdas ilmansuodatin: Periodically check and clean the air filter on the pressure regulator. A clogged filter can reduce airflow and efficiency. Refer to the regulator's specific instructions for cleaning or replacing the filter element.
• Yleinen puhdistus: Pyyhi kompressorin ulkopinta mainoksellaamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the compressor is unplugged before cleaning.
• Varastointi: When storing the compressor for extended periods, ensure the air tank is drained and the unit is clean and dry. Store in a cool, dry place.

7. Vianmääritys

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.