1. Johdanto
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Fengda FD-186 Professional Airbrush Compressor. Please read this manual thoroughly before using the compressor and retain it for future reference.
The Fengda FD-186 is a compact, oil-free mini compressor designed for precision airbrushing. It features a 3-liter air tank, a pressure regulator with a filter and manometer, and an automatic start/stop function for consistent air pressure. Its quiet operation and portability make it ideal for various applications, including airbrushing, cosmetic studios, nail art, tattooing, and hobby use. This compressor is compatible with airbrushes featuring nozzles from 0.2mm to 1mm.
Kuva 1.1: Täysi view of the Fengda FD-186 Professional Airbrush Compressor.
2. Turvallisuusohjeet
VAROITUS: Näiden turvallisuusohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon tai vakavan vamman.
- Sähköturvallisuus: Ensure the compressor is connected to a properly grounded outlet with the correct voltage (220-240V / 50Hz). Do not operate with damaged cords or plugs. Keep the power cord away from heat, oil, and sharp edges.
- Paineturvallisuus: Never exceed the maximum operating pressure of 4 bars (57 PSI). Do not tamper with the safety/drain valve. Always release air pressure from the tank before disconnecting hoses or performing maintenance.
- Ilmanvaihto: Käytä kompressoria hyvin ilmastoidussa tilassa ylikuumenemisen estämiseksi. Älä tuki ilmanvaihtoaukkoja.
- Henkilökohtainen suojaus: Wear appropriate personal protective equipment, such as safety glasses, when operating the airbrush system.
- Lapset ja lemmikit: Pidä lapset ja lemmikit poissa kompressorin läheltä käytön aikana.
- Varastointi: Store the compressor in a dry, clean, and secure location when not in use.
- Käyttötarkoitus: Use the compressor only for its intended purpose of airbrushing and related applications as described in this manual.
3. Tuote ohiview ja komponentit
The Fengda FD-186 compressor is designed for ease of use and reliable performance. Key components include:
- Kompressoriyksikkö: The main motor and pump assembly.
- Air Tank (3 Liters): Stores compressed air to ensure a consistent, pulse-free airflow.
- Paineensäädin: Mahdollistaa ulostulevan ilmanpaineen säädön.
- Manometri (painemittari): Näyttää nykyisen ilmanpaineen.
- Ilmansuodatin: Removes moisture and particles from the air, preventing contamination of your work.
- Safety/Drain Valve: Releasing pressure and draining condensed moisture from the air tank.
- Virtakytkin: To turn the compressor on and off.
- Kantokahva: Helppoa siirrettävyyttä varten.
3.1 Tärkeimmät ominaisuudet
- Powerful and constant working pressure.
- Very quiet operation (47 dB).
- Oil-free design, requiring minimal maintenance.
- Portable due to its low weight.
- Automatic start at 3 BAR (43 PSI) and automatic stop at 4 BAR (57 PSI).
- 3-liter pressure vessel ensures balanced air output.
- Equipped with a safety/drain valve.
- Automatic overheat protection for enhanced safety and durability.
Image 3.1: Close-up of the pressure gauge and regulator with air filter.
Image 3.2: Detail of the power switch.
Image 3.3: Detail of the air tank drain valve.
Kuva 3.4: Yläosa view of the compressor head.
4. Asennus
- Purkaminen: Carefully remove the compressor from its packaging. Inspect for any signs of damage during transit.
- Sijoitus: Aseta kompressori vakaalle, tasaiselle alustalle hyvin ilmastoituun tilaan. Varmista, että laitteen ympärillä on riittävästi tilaa ilmankiertoa varten.
- Connect Airbrush Hose: Connect your airbrush hose to the G 1/8 air connection port on the pressure regulator. Ensure the connection is secure to prevent air leaks.
- Liitä virta: Plug the power cable into a grounded 220-240V / 50Hz electrical outlet.
- Alkutarkastus: Before first use, ensure all connections are tight and the drain valve on the air tank is closed.
5. Käyttöohjeet
- Virta päälle: Flip the power switch to the "ON" position. The compressor will start to fill the air tank.
- Automaattinen toiminta: The compressor will automatically stop once the pressure in the 3-liter air tank reaches 4 BAR (57 PSI). It will then automatically restart when the pressure drops to 3 BAR (43 PSI) during use. This ensures a consistent air supply without constant motor operation.
- Paineen säätö: Use the knob on the pressure regulator to adjust the desired working pressure. Turn clockwise to increase pressure and counter-clockwise to decrease it. Monitor the manometer to set the precise pressure required for your airbrushing task.
- Airbrush Use: Once the desired pressure is set, you can begin using your airbrush. The air filter will ensure clean, dry air is delivered to your airbrush.
- Virta pois: After use, turn off the compressor by flipping the power switch to the "OFF" position.
- Jäännöspaineen vapauttaminen: It is recommended to release any residual air pressure from the tank by opening the drain valve or briefly activating your airbrush until the manometer reads zero.
5.1 Tuote-esittelyvideo
Video 5.1: Lyhyt katsausview and demonstration of the Fengda FD-186 Airbrush Compressor.
Video 5.2: Demonstration of the Wiltec AF186 compressor, which shares similar operational principles with the Fengda FD-186.
6. Huolto
Säännöllinen huolto varmistaa kompressorisi pitkän käyttöiän ja optimaalisen suorituskyvyn.
- Tyhjennä ilmasäiliö: After each use, or at least daily, open the drain valve at the bottom of the air tank to release any accumulated moisture. This prevents rust and extends the tank's life.
- Puhdas ilmansuodatin: Periodically check the air filter on the pressure regulator. If it appears dirty, clean or replace it according to the manufacturer's recommendations to ensure clean air delivery.
- Yleinen puhdistus: Pyyhi kompressorin ulkopinta mainoksellaamp liinalla pölyn ja roskien poistamiseen. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
- Tarkista liitännät: Regularly inspect all air connections and hoses for leaks or damage. Tighten any loose connections.
- Ylikuumenemissuoja: The compressor has automatic overheat protection. If it shuts down due to overheating, allow it to cool down completely before restarting. Ensure proper ventilation.
7. Vianmääritys
Yleisiä ongelmia ja niiden ratkaisuja on seuraavassa taulukossa:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Kompressori ei käynnisty. | No power, power switch off, thermal overload. | Check power connection and outlet. Ensure power switch is ON. Allow compressor to cool down if it overheated. |
| No air output or low pressure. | Air tank empty, pressure regulator set too low, air leaks, clogged air filter. | Allow tank to fill. Adjust pressure regulator. Check all connections for leaks. Clean or replace air filter. |
| Inconsistent air pressure (pulsation). | Air tank not fully pressurized, regulator malfunction. | Ensure air tank is allowed to fill completely. If problem persists, contact support. |
| Kompressori ylikuumenee ja sammuu. | Prolonged use, poor ventilation. | Allow the unit to cool down. Ensure adequate ventilation around the compressor. Avoid continuous operation for extended periods. |
| Excessive moisture in air output. | Air tank not drained, clogged air filter. | Regularly drain the air tank. Clean or replace the air filter. |
8. Tekniset tiedot
| Erittely | Arvo |
|---|---|
| Merkki | Fengda |
| Mallin nimi | FD-186 |
| Mallinumero | AS-186 |
| Voitage | 220-240 V / 50 Hz |
| Tehoa | 0.123 kW (1/6 hp) |
| Nopeus | 1450/1700 kierrosta / min |
| Melutaso | 47 dB / 1m |
| Ilmavirtaus | 20-23 l/min (21.5 L/min) |
| Ilmaliitäntä | G 1/8 |
| Kaapelin pituus | 1.9 m |
| Sertifikaatit | CE, GS, ETL, CETL, ROHS |
| Säädettävä paine | 0 bar to 4 bars |
| Automatic Start Pressure | 3 BAR (43 PSI) |
| Automatic Stop Pressure | 4 BAR (57 PSI) |
| Pressure Regulator Range | 0 – 10 Bars (0-100 PSI) |
| Ilmasäiliön kapasiteetti | 3 litraa |
| Mitat (P x L x K) | 33 L x 15 W x 34 H cm |
| Paino | 11.02 paunaa (noin 5 kg) |
| Materiaali | Metalli |
| Suositeltu käyttö | Airbrushing |
Image 8.1: Dimensions of the Fengda FD-186 Airbrush Compressor.
9. Takuu ja tuki
Specific warranty information was not provided in the product details. Please refer to your purchase documentation or contact your retailer for details regarding warranty coverage and customer support.
For technical assistance or inquiries, please contact Fengda customer service or your authorized dealer.
