BEST BAL700 Emergency Lighting Ballast User Manual

1. Tuote ohiview

The BEST BAL700 Emergency Lighting Ballast is designed to convert new or existing fluorescent fixtures into emergency lighting units. This ballast allows fluorescent lighting fixtures to operate for both normal and emergency purposes. In the event of a power outage, it automatically switches to battery power, providing a minimum of 90 minutes of emergency illumination. It is compatible with a wide range of fluorescent lamps and AC ballasts.

Image 1.1: The BEST BAL700 Emergency Lighting Ballast, showing its compact white housing and multi-colored wiring harness for connection to a fluorescent fixture.

2. Tärkeimmät ominaisuudet

• Dual Voitage Yhteensopivuus: Operates on both 120V and 277V AC power supplies.
• Hätävalo: Provides a minimum of 90 minutes of emergency lighting with a maximum initial lumen output of 700 lumens.
• Automaattinen siirto: Features an internal solid-state transfer switch that automatically connects the internal battery to the fluorescent lamp(s) during power interruptions.
• AC Output Enhancement: Ensures compatibility with newer lamp technologies and contributes to prolonged lamp elämää.
• Ladattava akku: Equipped with a long-life, maintenance-free, rechargeable sealed NiCd battery.
• Pikalataus: Fully automatic solid-state, two-rate charger recharges a discharged battery within 24 hours.
• Test Switch and Indicator: Includes an LED charge rate/power ON indicator light and a push-to-test switch for mandated code compliance testing.
• Aikaviive: Incorporates a time delay enhancement to overcome end-of-life circuit protection in fluorescent lamps.
• Damp Sijainnin luokitus: UL listed for installation in damp sijainnit.
• Kompakti muotoilu: Durable painted steel construction in a white finish, designed to fit most fluorescent fixtures.

3. Tekniset tiedot

Kuva 3.1: Sivu view of the BEST BAL700 Emergency Lighting Ballast, highlighting its compact form factor suitable for various fixture installations.

4. Asennusohjeet

4.1. Turvaohjeet

• VAROITUS: Sähköiskun vaara. Irrota virta sulakekeskuksesta tai sulaketaulusta ennen asennusta tai huoltoa.
• Installation should be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local codes.
• Varmista, että syöttötilavuustage (120V or 277V) matches the building's electrical supply.
• Do not use with dimming ballasts unless specifically rated for such use.
• Älä asenna kaasu- tai sähkölämmittimien lähelle.

4.2. Asennus

The BAL700 ballast is suitable for installation inside, on top of, or remotely from the fixture. Its compact design allows for versatile placement within most fluorescent fixtures.

1. Choose a mounting location that allows for proper heat dissipation and access for maintenance.
2. Secure the ballast using appropriate fasteners (not included) through the mounting tabs.

4.3. Johdotus

Refer to the wiring diagram provided on the ballast label for specific connections. General steps include:

1. Connect the unswitched AC power supply (120V or 277V) to the ballast's input wires.
2. Connect the ballast's output wires to the fluorescent lamp(s) and the existing AC ballast as per the diagram.
3. Varmista, että kaikki liitännät ovat turvallisia ja eristettyjä.
4. Install the LED test switch in an accessible location on the fixture or wall plate.

Huomautus: The BAL700 can be used in both switched and unswitched fixtures. For switched fixtures, ensure the emergency ballast receives unswitched power to allow for emergency operation regardless of the wall switch position.

5. Käyttöohjeet

5.1. Normaali käyttö

When AC power is present, the BAL700 ballast charges its internal battery. The connected fluorescent lamp(s) will operate normally via the existing AC ballast. The LED indicator light on the test switch will illuminate, indicating that the battery is charging and the unit is ready for emergency operation.

5.2. Emergency Operation

Upon interruption of normal AC power, the BAL700 automatically switches to emergency mode. The internal solid-state transfer switch activates, powering one fluorescent lamp from the internal NiCd battery for a minimum of 90 minutes. When AC power is restored, the unit automatically returns to normal operation and begins recharging the battery.

5.3. Testing the Unit

Regular testing is required to ensure proper emergency function and compliance with safety codes.

1. Kuukausittainen testi: Press and hold the push-to-test switch for at least 30 seconds. The emergency lamp should illuminate. Release the switch; the lamp should extinguish (if AC power is present).
2. Vuosittainen testi: Conduct a full 90-minute discharge test. Interrupt AC power to the fixture for 90 minutes. The emergency lamp should remain illuminated for the entire duration. After the test, restore AC power and allow the battery to recharge for 24 hours.

Huomautus: Keep records of all tests for inspection purposes.

6. Huolto

The BEST BAL700 Emergency Lighting Ballast is designed for low maintenance. The NiCd battery is sealed and maintenance-free. However, regular checks are recommended:

• Silmämääräinen tarkastus: Tarkista yksikkö säännöllisesti näkyvien vaurioiden, löysien liitosten tai ylikuumenemisen merkkejä varten.
• Akun lataus: After any emergency discharge or test, ensure the unit has at least 24 hours of uninterrupted AC power to fully recharge the battery.
• Puhdistus: If necessary, gently wipe the exterior of the ballast with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Akun vaihto: While designed for long life, NiCd batteries have a finite lifespan. If the unit fails to provide 90 minutes of emergency illumination during an annual test, the battery may need replacement. Contact qualified service personnel for battery replacement.

7. Vianmääritys

Jos vianmääritysohjeet eivät ratkaise ongelmaa, ota yhteyttä asiakastukeen.

8. Takuutiedot

The BEST BAL700 Emergency Lighting Ballast comes with a Viiden vuoden takuu against defects in material and workmanship. This warranty excludes lamps. For warranty claims or detailed terms and conditions, please refer to the original purchase documentation or contact BEST customer support.

9. Asiakastuki

For technical assistance, installation questions, or warranty inquiries, please contact BEST customer support:

• Websivusto: Visit the official BEST Lighting Products websivustolta usein kysytyt kysymykset ja yhteystiedot.
• Puhelin: Refer to your product packaging or the manufacturer's websivustolta ajantasaisin asiakaspalvelun puhelinnumero.
• Sähköposti: General inquiries can often be sent via email forms available on the manufacturer's websivusto.

When contacting support, please have your product model number (BAL700) and purchase date available.