ROLAND D-110 Digital Sound Module Instruction Manual

1. Johdanto

Kiitos ostoksestasiasing the ROLAND D-110 Digital Sound Module. The D-110 is a versatile rack-mount digital sound module featuring ROLAND's acclaimed LA (Linear Arithmetic) synthesis technology. It offers 32 voices of polyphony and 8-part multi-timbral capabilities, making it an ideal addition to any MIDI-based music production setup. This unit is designed for direct power connection.

This manual provides essential information for the proper setup, operation, and maintenance of your D-110. Please read it thoroughly before using the unit to ensure optimal performance and longevity.

Kuva 1: Etuosa view of the ROLAND D-110 Digital Sound Module, showing controls and display.

2. Turvallisuustiedot

Turvallisen käytön varmistamiseksi ja vaurioiden välttämiseksi noudata seuraavia varotoimia:

• Virtalähde: Käytä vain määritettyä virtalähdettä voltage. Varmista, että virtajohto on kytketty kunnolla eikä ole vaurioitunut.
• Sijainti: Place the unit on a stable, level surface. Avoid locations exposed to direct sunlight, extreme temperatures, high humidity, or excessive dust.
• Ilmanvaihto: Älä tuki tuuletusaukkoja. Varmista riittävä ilmankierto laitteen ympärillä ylikuumenemisen estämiseksi.
• Ulkomaiset esineet: Do not allow liquids or foreign objects to enter the unit. If this occurs, disconnect the power immediately and contact qualified service personnel.
• Huolto: Do not attempt to service the unit yourself. Refer all servicing to qualified ROLAND service personnel.

3. Pakkauksen sisältö

Tarkista, että pakkauksessasi on kaikki seuraavat tuotteet:

• ROLAND D-110 Digital Sound Module Unit
• Vaihtovirtajohto
• Käyttöopas (tämä asiakirja)

Jos jokin osa puuttuu tai on vaurioitunut, ota välittömästi yhteyttä myyjään.

4. Asennus

4.1 Virran kytkeminen

1. Ensure the D-110's power switch is in the OFF position.
2. Connect the supplied AC power cable to the AC IN jack on the rear panel of the D-110.
3. Plug the other end of the power cable into a standard AC outlet.

4.2 Ääniliitännät

Connect the D-110's audio outputs to your mixer, amplifier, or audio interface using appropriate audio cables (not included).

• Päälähdöt (V/O): For stereo output.
• Individual Outputs: The D-110 may feature individual outputs for routing specific parts to separate mixer channels. Refer to the rear panel for available jacks.

4.3 MIDI-liitännät

To control the D-110 from a MIDI keyboard, sequencer, or computer, connect MIDI cables (not included) as follows:

• Connect the MIDI OUT of your controller/sequencer to the MIDI IN of the D-110.
• If you wish to send MIDI data from the D-110 (e.g., system exclusive data), connect the MIDI OUT of the D-110 to the MIDI IN of your receiving device.

5. Käyttöohjeet

5.1 Virran kytkeminen päälle/pois

• Virran kytkeminen: Ensure all connections are made, then press the POWER switch on the front panel. The display will illuminate.
• Virran sammuttaminen: Paina POWER-kytkintä uudelleen.

5.2 Basic Sound Selection

The D-110 contains a variety of preset sounds (Tones). Use the front panel buttons and data entry controls to browse and select sounds.

1. Käytä PANKKI buttons to select a sound bank (e.g., A, B, C, D).
2. Käytä MÄÄRÄ painikkeita tai ARVO dial to select a specific Tone within the bank.
3. The display will show the name of the selected Tone.

5.3 Multi-Timbral Mode (Performance Mode)

The D-110 can play up to 8 different sounds simultaneously, each assigned to a separate MIDI channel. This is known as Performance Mode.

1. Paina SUORITUSKYKY button to enter Performance Mode.
2. Käytä OSA buttons to select the MIDI part you wish to edit.
3. Assign a Tone to each part and set its MIDI channel, volume, pan, and other parameters using the display and controls.
4. Save your custom performance settings to a user memory location.

5.4 Editing Tones and Performances

The D-110 offers extensive editing capabilities for Tones and Performances. Refer to the detailed sections in the full owner's manual for in-depth instructions on parameter editing, effects, and saving your custom sounds.

6. Huolto

6.1 Puhdistus

• Pyyhi laitteen ulkopinta pehmeällä, kuivalla liinalla.
• Pinttyneen lian poistamiseksi käytä hieman damp liinalla ja pyyhi sitten kuivaksi.
• Älä käytä hankaavia puhdistusaineita, vahoja tai liuottimia, sillä ne voivat vahingoittaa pintaa.

6.2 Varastointi

When storing the D-110 for extended periods, ensure it is powered off and disconnected from the AC outlet. Store it in a cool, dry place away from direct sunlight and extreme temperatures.

7. Vianmääritys

If the problem persists after trying these solutions, please contact ROLAND customer support or a qualified service center.

8. Tekniset tiedot

• Malli: ROLAND D-110
• Sound Generation: LA (Linear Arithmetic) Synthesis
• Polyfonia: 32 ääntä
• Multi-timbral Parts: 8
• Muisti: Internal Tones, Performances, and User Memory (expandable with memory card, e.g., KV-211 if included)
• Liittimet: MIDI IN/OUT/THRU, Audio Outputs (L/R, possibly individual), AC IN
• Virtalähde: Direct AC connection
• Mitat: Standard 1U rack-mount size (specific dimensions may vary slightly)
• Paino: (Information not provided, refer to product packaging)

Tekniset tiedot voivat muuttua ilman erillistä ilmoitusta.

9. Takuu ja tuki

ROLAND products are covered by a limited warranty. Please refer to the warranty card included with your product or visit the official ROLAND websivustolta tarkemmat takuuehdot omalle alueellesi.

For technical support, service, or inquiries, please contact your local ROLAND distributor or authorized service center. Contact information can typically be found on the ROLAND official websivusto: www.roland.com/global/support/