Paulmann 28325 LED Diamond Quadro GU5.3 12V 2700K Instruction Manual

1. Johdanto ja tuotekatsausview

This manual provides essential information for the safe and efficient use of your Paulmann 28325 LED Diamond Quadro lamp. This product is a 3-watt LED lamp designed for 12-volt systems, featuring a GU5.3 base and emitting a warm white light at 2700 Kelvin. Its unique crystal reflector design provides directed illumination.

Image 1.1: The Paulmann 28325 LED Diamond Quadro GU5.3 lamp.

2. Turvallisuusohjeet

Please read and understand all safety instructions before installing or operating the lamp. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Sähköturvallisuus: Always disconnect power to the fixture before installing, removing, or servicing the lamp.
• Voitage Yhteensopivuus: Tämä lamp operates on a 12 voltin tasavirta power supply. Do not connect it to a 230-volt AC mains supply without a suitable transformer.
• Ei himmennettävä: Tämä LED lamp is ei himmennettävä. Do not use it with dimmer switches, as this can damage the lamp ja mitätöidä takuun.
• IP20 luokitus: Lamp has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Use only in dry, indoor environments.
• Lämpötila: Varmista riittävä ilmanvaihto l:n ympärilläamp to prevent overheating. Do not cover the lamp.
• purkaminen: Älä yritä purkaa, muokata tai korjata laitetta.amp. Sisällä ei ole käyttäjän huollettavia osia.
• Hävittäminen: Hävitä lamp according to local regulations for electronic waste.

3. Asennus ja asennus

Follow these steps to properly install your Paulmann 28325 LED Diamond Quadro lamp:

1. Virran katkaisu: Ensure the power supply to the lighting fixture is completely switched off at the main circuit breaker before beginning installation.
2. Identify Socket: Verify that your fixture has a compatible GU5.3 socket. The GU5.3 base features two pins spaced 5.3mm apart.
3. Lisää Lamp: Carefully align the two pins of the LED lamp with the holes in the GU5.3 socket. Gently push the lamp into the socket until it is securely seated. Do not force the lamp.
4. Virtalähde: Ensure the fixture is connected to a stable 12-volt DC power supply. If replacing a halogen lamp, ensure the existing transformer is compatible with LED loads.
5. Palauta virta: Kerran lamp is securely installed, restore power to the fixture at the main circuit breaker.

Image 3.1: Close-up of the GU5.3 LED lamp, showing the base pins.

Image 3.2: Diagram showing different lamp base types, including GU5.3 (12V section).

4. Käyttöohjeet

Operating the Paulmann 28325 LED Diamond Quadro lamp on suoraviivaista:

• Kytke päälle/pois päältä: Use the standard wall switch or fixture switch to turn the lamp päälle tai pois päältä.
• Valoteho: Lamp provides a directed, warm white light (2700K) suitable for accent lighting or general illumination in appropriate fixtures.
• Ei himmennettävä: As stated previously, this lamp is not designed for dimming. Attempting to dim it may cause flickering, damage, or premature failure.

5. Huolto

The Paulmann 28325 LED Diamond Quadro lamp requires minimal maintenance due to its long lifespan and durable design.

• Puhdistus: Puhdistaaksesi lamp, ensure the power is off and the lamp is cool. Gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the lampn viimeistely tai sisäiset komponentit.
• Lamp Korvaus: Lamp has an average lifespan of 15,000 hours. When it reaches the end of its life, replace it with a new Paulmann 28325 LED Diamond Quadro lamp or a compatible GU5.3 12V LED lamp.
• Ei käyttäjän huollettavia osia: Lamp contains no user-serviceable parts. Do not attempt to open or repair it.

6. Vianmääritys

If you encounter issues with your Paulmann 28325 LED Diamond Quadro lamp, katso seuraava vianetsintäopas:

• Lamp Ei syty:
  • Varmista, että kiinnityslaitteen virransyöttö on päällä.
  • Tarkista, että lamp is correctly and securely seated in the GU5.3 socket.
  • Verify that the power supply is providing 12 volts DC. An incompatible or faulty transformer can prevent the lamp töistä.
  • Tarkista lamp for any visible damage. If damaged, replace the lamp.
• Lamp Välkyntää:
  • Vahvista, että lamp ei ole kytketty himmentimeen. Tämä lamp ei ole himmennettävissä.
  • Check the 12V DC power supply for stability. Fluctuations in voltage can cause flickering.
  • Ensure the transformer is compatible with LED loads. Some older transformers designed for halogen lamps may not work correctly with LEDs.
• Light Output is Weak or Incorrect Color:
  • Tarkista lamp specifications match your requirements (e.g., 2700K warm white).
  • Varmista, että lamp is receiving the correct 12V DC voltage. Under-voltage can reduce light output.

If these steps do not resolve the issue, please contact Paulmann customer support.

7. Tekniset tiedot

Detailed technical specifications for the Paulmann 28325 LED Diamond Quadro lamp:

Image 7.1: EU Energy Label for Paulmann 28325.

Image 7.2: Product data sheet with detailed specifications.

Tarkempia tuotetietoja on saatavilla EPREL-tietokannassa: https://eprel.ec.europa.eu/qr/860106

8. Takuu ja tuki

Paulmann products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official Paulmann websivustoa tai ota yhteyttä jälleenmyyjään.

Säilytä ostokuittisi ostotodistuksena mahdollisten takuuvaatimusten varalta.