Traxxas EZ-Peak Plus 100 Watt NiMH/LiPo Dual Charger with iD System User Manual

Johdanto

The Traxxas EZ-Peak Plus 100 Watt NiMH/LiPo Dual Charger with iD System is designed for efficient and convenient charging of Traxxas iD batteries. It features automatic battery identification and charge optimization. The charger can simultaneously charge two batteries at up to 50 watts (4 amps) each, or a single battery at a maximum of 100 watts (8 amps) in High-Output mode. It supports both NiMH and LiPo battery chemistries. An Advanced Mode provides manual control over charging settings, and integrated balance ports are available for conventional LiPo batteries.

Tärkeimmät ominaisuudet

• Automatic recognition of Traxxas iD batteries for optimized charge settings.
• 100-Watt output for charging 5-8-cell NiMH batteries and 2S and 3S LiPo batteries.
• Advanced Mode for manual control and integrated balance ports for conventional LiPo batteries.
• User-friendly interface with charge progress indicator, audible alerts, and integrated cooling fan.
• Capable of charging one NiMH and one LiPo battery simultaneously.
• One-button LiPo storage charge function to help maintain battery health.

Kuva: Yläosa view of the Traxxas EZ-Peak Dual Charger, highlighting the control panel and charging ports.

Asennus

Purkaminen ja tarkastus

Carefully remove the charger from its packaging. Inspect the charger for any signs of damage. If any damage is observed, do not use the charger and contact customer support.

Virtaliitäntä

1. Connect the AC power cord to the charger's power input port.
2. Liitä virtajohto tavalliseen pistorasiaan.
3. The charger will power on, indicated by illuminated LEDs.

Kuva: Sivu view of the Traxxas EZ-Peak Dual Charger, illustrating the cooling vents and power input location.

Käyttöohjeet

Charging Traxxas iD Batteries

1. Varmista, että laturi on kytketty virtalähteeseen.
2. Connect your Traxxas iD battery to one of the charging ports on the charger. The iD system will automatically detect the battery type and capacity.
3. Press and hold the START/STOP button for the corresponding channel for 2 seconds to begin charging. The charger will emit a tone, and the charge status LEDs will illuminate to indicate progress.
4. Once charging is complete, the charger will emit a series of tones, and all charge status LEDs will turn green. Disconnect the battery.

Advanced Mode (Manual Control)

For non-iD batteries or to manually adjust settings, the Advanced Mode can be used. This mode allows for selection of battery type (LiPo, NiMH) and charge rate. Refer to the official user guide for detailed instructions on using Advanced Mode and connecting conventional LiPo batteries with external balance leads.

Kaksoislataus

The EZ-Peak Dual charger can charge two batteries simultaneously. Connect each battery to its respective charging port and initiate charging for each channel independently by pressing its START/STOP button. The charger can handle different battery types (e.g., one NiMH and one LiPo) at the same time.

Image: Traxxas EZ-Peak Dual Charger shown with both a LiPo battery and a NiMH battery connected and actively charging.

Huolto

• Puhdistus: Regularly clean the charger's exterior with a soft, dry cloth. Avoid using solvents or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
• Varastointi: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect it from the power source when not in use.
• Kaapelin tarkastus: Periodically inspect all cables and connectors for any signs of wear, cuts, or damage. Replace damaged cables immediately.

Vianetsintä

If you encounter issues with your Traxxas EZ-Peak Dual Charger, consider the following:

• Ei virtaa: Ensure the AC power cord is securely plugged into both the charger and a working wall outlet.
• Lataus ei käynnisty: Verify that the battery is correctly connected. For iD batteries, ensure a firm connection. For manual mode, confirm that the correct battery type and charge rate are selected.
• Virhekoodit: The charger may display specific LED patterns or audible alerts to indicate an error. Refer to the official Traxxas EZ-Peak Plus User Guide for a comprehensive list of error codes and their corresponding solutions.

For detailed troubleshooting steps and error code explanations, please consult the official Traxxas EZ-Peak Plus User Guide (PDF).

Tekniset tiedot

Image: Dimensions of the Traxxas EZ-Peak Dual Charger.

Takuu ja tuki

For information regarding the product warranty, please refer to the official documentation included with your charger or visit the manufacturer's website. Traxxas provides support for its products to ensure customer satisfaction.

If you require technical assistance, have questions about operation, or need to inquire about warranty service, please contact Traxxas customer support directly. You can often find contact information on the official Traxxas website or within the Traxxas EZ-Peak Plus User Guide (PDF).