KanexPro Full-Motion Tilt/Swivel TV Wall Mount

KanexPro Täysin liikkuva kallistuva/kääntyvä TV-seinäkiinnike Käyttöohje

Model: Full-Motion Tilt/Swivel TV Wall Mount

1. Johdanto

This manual provides essential instructions for the safe and proper installation, operation, and maintenance of your KanexPro Full-Motion Tilt/Swivel TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.

Turvallisuustiedot

  • Varmista, että kiinnityspinta kestää turvallisesti telineen ja television yhteispainon.
  • Älä ylitä suurinta sallittua painokapasiteettia, joka on 30 kg (66 lbs).
  • Käytä aina asianmukaisia ​​turvavarusteita asennuksen aikana.
  • Consult a qualified professional if you are unsure about the installation process or wall type.
  • Pidä lapset ja lemmikkieläimet loitolla asennuksen aikana.

2. Pakkauksen sisältö

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the mount. Contact customer support for assistance.

  • Full-Motion TV Wall Mount Assembly
  • Seinäkiinnitystarvikkeet (ruuvit, ankkurit)
  • TV Mounting Hardware (various screw sizes, spacers)
  • Käyttöohje
KanexPro Full-Motion Tilt/Swivel TV Wall Mount

Kuva 2.1: ohiview of the KanexPro Full-Motion Tilt/Swivel TV Wall Mount. This image displays the main assembly of the wall mount, including the wall plate, articulating arms, and the VESA compatible TV plate.

3. Asennus ja asennus

Follow these steps carefully to ensure a secure and stable installation of your TV wall mount.

3.1 Asennusta edeltävät tarkastukset

  • Seinän tyyppi: Determine if your wall is solid concrete, brick, or wood stud. Different wall types require specific mounting hardware.
  • Stud Finder: If mounting to wood studs, use a stud finder to locate the center of the studs.
  • Tarvittavat työkalut: Drill, level, tape measure, pencil, Phillips head screwdriver, socket wrench.
  • TV-yhteensopivuus: Ensure your TV's VESA pattern and weight are within the mount's specifications. This mount is compatible with Hisense Roku TV 40H4 and similar models up to 66 lbs.

3.2 Seinälevyn kiinnittäminen

  1. Position the wall plate on the desired location on the wall. Use a level to ensure it is perfectly horizontal.
  2. Mark the drilling holes with a pencil.
  3. Drill pilot holes according to the marked positions and your wall type. For wood studs, drill 5/32 inch (4mm) holes. For concrete/brick, drill 3/8 inch (10mm) holes and insert wall anchors.
  4. Kiinnitä seinälevy seinään mukana toimitetuilla pulteilla ja aluslevyillä. Kiristä tiukasti.

3.3 Attaching the TV Plate to the Television

  1. Aseta televisio varovasti kuvaruutu alaspäin pehmeälle ja puhtaalle alustalle.
  2. Tunnista television takana olevat VESA-kiinnitysreiät.
  3. Select the appropriate screws and spacers from the provided hardware kit that fit your TV's mounting holes.
  4. Attach the TV plate (the part of the mount that connects to the TV) to the back of your television. Ensure it is centered and securely fastened. Do not overtighten.

3.4 Hanging the Television

  1. With assistance, carefully lift the television with the attached TV plate.
  2. Align the TV plate with the articulating arms of the wall-mounted assembly.
  3. Hook the TV plate onto the arms and ensure it is securely seated.
  4. Engage any safety locking mechanisms if present on your mount to prevent accidental dislodgement.
KanexPro Full-Motion TV Wall Mount Dimensions and Articulation Diagram

Image 3.1: Technical diagram illustrating the dimensions and articulation range of the KanexPro Full-Motion TV Wall Mount. This diagram shows the mount's extension, swivel, and tilt capabilities, along with key measurements in millimeters.

4. Jalustan käyttö

Your KanexPro Full-Motion TV Wall Mount allows for flexible positioning of your television.

  • Kääntymisen säätö: The mount allows for 90 degrees of swivel to the left and right. Gently push or pull the TV to achieve the desired viewkulma.
  • Kallistuksen säätö: The mount offers a tilt range of +20 to -20 degrees. Loosen the tilt adjustment knobs (if present), adjust the TV to the desired vertical angle, and then re-tighten the knobs to secure the position.
  • Laajennus: The articulating arms allow the TV to be extended away from the wall for optimal viewing or retracted for a flush profile.

Always move the TV smoothly and avoid sudden, forceful movements. Ensure all cables have enough slack to accommodate the full range of motion without tension.

5. Huolto

Säännöllinen huolto auttaa varmistamaan TV-seinätelineesi pitkän käyttöiän ja turvallisen toiminnan.

  • Puhdistus: Pyyhi teline pehmeällä, kuivalla liinalla. Vältä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa pintaa.
  • Säännölliset tarkastukset: Every 3-6 months, inspect all screws and bolts to ensure they are still tight. Re-tighten if necessary. Check for any signs of wear or damage to the mount components.
  • Voitelu: Nivelet on suunniteltu tasaista liikettä varten. Jos nivelissä ilmenee jäykkyyttä, nivelpisteisiin voidaan levittää pieni määrä silikonipohjaista voiteluainetta.

6. Vianmääritys

If you encounter issues with your TV wall mount, refer to the following common problems and solutions.

OngelmaMahdollinen syyRatkaisu
Televisio ei ole vaakasuorassa asennuksen jälkeen.Wall plate or TV plate not perfectly level.Carefully remove the TV, adjust the wall plate or TV plate using a level, and re-mount.
Kiinnitys tuntuu löysältä tai heiluvalta.Mounting screws are not fully tightened or incorrect hardware used.Ensure all wall and TV mounting screws are securely tightened. Verify correct hardware for your wall type. Do not exceed weight capacity.
Vaikeuksia kallistuksen tai kääntökulman säätämisessä.Tilt knobs are too tight or joints require lubrication.Loosen tilt knobs before adjusting. Apply a small amount of silicone-based lubricant to stiff joints.
TV cables are too tight.Insufficient cable slack for full range of motion.Ensure all cables have enough slack to prevent tension when the TV is moved to its maximum extension or angle.

7. Tekniset tiedot

  • Merkki: Kanexpro
  • Malli: Full-Motion Tilt/Swivel TV Wall Mount
  • Asennustyyppi: Seinäteline
  • Liikkeen tyyppi: Nivelletty, kääntyvä, kallistuva
  • Materiaali: Seosteräs
  • Väri: Musta
  • Yhteensopivat laitteet: Television (e.g., Hisense Roku TV 40H4)
  • Suurin kapasiteetti: 66 lbs (30 kg)
  • Swivel Feature: 90 Degrees Left to Right
  • Tilt Feature: +20 - -20 astetta
  • Esikoottu: Yes, for quick installation

8. Takuu ja tuki

For warranty information or technical support, please contact KanexPro customer service directly. Refer to the product packaging or the official KanexPro websivusto yhteystiedot.

Please have your product model information and purchase date available when contacting support.

© 2023 KanexPro. All rights reserved.

Aiheeseen liittyvät asiakirjat - Full-Motion Tilt/Swivel TV Wall Mount

Preview KanexPro EXT-HDMIKVM70M 4K60Hz HDMI KVM Extender User Manual
User manual for the KanexPro EXT-HDMIKVM70M 4K60Hz HDMI KVM extender. Includes installation instructions, technical specifications, and troubleshooting for extending HDMI and USB 2.0 signals up to 70 meters.
Preview KanexPro Dante -virtalähteellä varustettu 2-kanavainen analoginen äänikooderi POE:lla, käyttöohje
Käyttöohje KanexPro AUD-DTE-ECODE:lle, Dante-virtalähteellä varustetulle 2-kanavaiselle analogiselle äänikooderille, jossa on POE. Yksityiskohtaiset ominaisuudet, tekniset tiedot, käyttö ja sovellusesimerkit.ampLes ammattimaisiin äänentoistojärjestelmiin.
Preview KanexPro AP3DBL 3-tuloinen ääni Amplifier -käyttöopas
User manual for the KanexPro AP3DBL 3-Input 40-Watt Audio Amplifier. Includes setup, connection, operation, RS232 control, and technical specifications.
Preview KanexPro AP3DBL 3-tuloinen ääni Amplifier -käyttöopas
Comprehensive user manual for the KanexPro AP3DBL 3-Input 40-Watt audio amplifier. Covers features, specifications, system connection, operations, troubleshooting, and warranty.
Preview KanexPro KVM-2X1HDMI8K 2-porttinen 8K@60Hz HDMI KVM-kytkin Käyttöohje
KanexPro KVM-2X1HDMI8K:n käyttöopas. Kyseessä on 2x1 KVM-kytkin, joka tukee 8K@60Hz -resoluutiota ja USB 3.0:aa. Sisältää ominaisuudet, tekniset tiedot, käytön ja ASCII-komennot.
Preview KanexPro HDMX88-18G: 4K UHD+ 8x8 HDMI-matriisikytkin USB-virtalähteillä - Käyttöopas
Tutustu KanexPro HDMX88-18G:hen, ammattimaiseen 8x8 HDMI-matriisikytkimeen, joka tukee 4K UHD -resoluutiota 60 Hz:n taajuudella. Tässä käyttöoppaassa kuvataan sen ominaisuudet, toiminta, tekniset tiedot ja ohjausvaihtoehdot, mukaan lukien RS-232, IR ja WebKäyttöliittymä, mikä tekee siitä ihanteellisen edistyneeseen AV-jakeluun ja älykotiintegraatioon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.