InnoGear 3 CREE XM-L T6 LED Headlamp Käyttöohje

1. Johdanto

Thank you for choosing the InnoGear 3 CREE XM-L T6 LED Headlamp. This manual provides essential information for the safe and efficient use of your headlampLue se huolellisesti ennen käyttöä ja säilytä se myöhempää tarvetta varten.

2. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki tarvittavat osat:

• InnoGear 3 CREE XM-L T6 LED Headlamp
• 2 x ladattava litiumioniakku
• Seinälaturi
• USB-latauskaapeli

Image: The InnoGear headlamp, two blue rechargeable batteries, a wall charger, and a USB charging cable are included in the package.

3. Tuote ohiview

The InnoGear headlamp features three CREE XM-L T6 LED lights for powerful illumination. It is designed for comfort and versatility in various outdoor activities.

Tärkeimmät komponentit:

• LED valot: Three high-power CREE XM-L T6 LEDs.
• Vaihtopainike: Located on the top of the main light housing for power and mode selection.
• Säädettävä päänauha: Elastic and adjustable for a secure and comfortable fit.
• Akkulokero: Located at the rear, housing two rechargeable batteries.
• Turvavalo: A red LED on the battery compartment for rear visibility.
• Säädettävä säteen kulma: The light housing can pivot up to 90 degrees.

Kuva: Lähikuva view päällikönamp's side, highlighting the 'Switch Button' on top and indicating '90° Rotation' for the light housing.

Image: The rear of the headlamp, showing the battery compartment with two blue batteries inserted, a 'Safety light' indicator, and charging ports.

4. Asennus

4.1 Akun asennus

1. Open the battery compartment cover located at the rear of the headlamp.
2. Insert the two rechargeable Lithium-Ion batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Sulje paristolokeron kansi kunnolla.

4.2 Akkujen lataaminen

Before first use, fully charge the batteries. The headlamp can be charged via the included wall charger or USB cable.

1. Connect the wall charger or USB cable to the charging port on the battery compartment.
2. Plug the wall charger into a power outlet or the USB cable into a compatible USB power source.
3. An indicator light on the charger or headlamp will show charging status (e.g., red for charging, green for fully charged).
4. Kun lataus on täynnä, irrota laturi.

4.3 Pääpannan säätäminen

Aseta päällinenamp on your head and adjust the elastic straps to achieve a snug yet comfortable fit. Ensure the light unit is centered on your forehead.

5. Käyttöohjeet

5.1 Virta päälle/pois

Press the switch button on top of the main light housing to turn the headlamp on. Press it again to cycle through modes and turn off.

5.2 Valotilojen vaihtaminen

Each press of the switch button cycles through the available light modes:

1. 1 LED Mode: Activates the center LED.
2. 2 LED Mode: Activates the two side LEDs.
3. 3 LED Mode: Activates all three LEDs for maximum brightness.
4. Strobe-tila: All three LEDs flash rapidly.
5. Pois: Kääntää päätäamp pois.

Image: A visual representation of the headlamp's light modes, including 1 LED, 2 LED, 3 LED, and Strobe, showing which lights are active in each mode.

Image: A person wearing the headlamp in a dark indoor setting, illustrating the broad and powerful beam of light projected onto a wall.

5.3 Sädekulman säätö

The light housing can be tilted up or down by up to 90 degrees to direct the beam precisely where needed. Gently pivot the light unit to adjust its angle.

5.4 Safety Light

The red LED on the rear battery compartment provides additional visibility from behind, enhancing safety during night activities.

6. Huolto

6.1 Puhdistus

• Pyyhi pääamp vartalo pehmeällä, d:lläamp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Clean the lens gently with a microfiber cloth to avoid scratches.

6.2 Akun hoito

• Recharge batteries regularly, even if not frequently used, to maintain their lifespan.
• If storing the headlamp for an extended period, remove the batteries.
• Use only the specified type of rechargeable Lithium-Ion batteries.

6.3 Varastointi

Säilytä pääamp viileässä, kuivassa paikassa suojassa suoralta auringonvalolta ja äärimmäisiltä lämpötiloilta.

7. Vianmääritys

• Headlamp ei syty:
  • Varmista, että paristot on asennettu oikein ja napaisuus on oikea.
  • Check if batteries are charged. Recharge if necessary.
  • Varmista, että paristolokeron kansi on suljettu kunnolla.
• Valontuotto on himmeä:
  • Batteries may be low. Recharge them fully.
  • Varmista, että linssi on puhdas eikä siinä ole esteitä.
• Headlamp ei veloita:
  • Check if the charging cable and wall charger are properly connected.
  • Varmista, että pistorasia on toimiva.
  • Try a different USB power source or wall outlet.

8. Tekniset tiedot

9. Takuutiedot

Specific warranty details are not provided in this document. For warranty claims or information, please refer to the product packaging or contact the manufacturer directly.

10. Tukea

For technical assistance, troubleshooting beyond this manual, or general inquiries, please contact InnoGear customer support through their official websivustolta tai jälleenmyyjältä, jolta tuote on ostettu.