FENGDA AS-189 Airbrush Compressor Instruction Manual

1. Johdanto

This manual provides essential information for the safe and efficient operation of your FENGDA AS-189 Airbrush Compressor. The AS-189 is a single-cylinder, oil-free reciprocating compressor designed for airbrushing applications. It features a 3.0-liter air tank, automatic start/stop functionality, and a maximum air pressure of 6 bar. Please read these instructions thoroughly before initial use and retain them for future reference.

2. Turvallisuusohjeet

Always observe the following safety precautions to prevent injury or damage to the compressor:

• Varmista virtalähteen voltage matches the compressor's requirements (220-240 V/50 Hz).
• Älä käytä kompressoria märässä tai damp ehdot.
• Pidä lapset ja luvattomat henkilöt poissa käynnissä olevan kompressorin läheltä.
• Always disconnect the power plug before performing any maintenance or when the compressor is not in use.
• Do not modify the compressor or its components. Use only original replacement parts.
• Huolehdi riittävästä tuuletuksesta käytön aikana ylikuumenemisen estämiseksi.
• Never direct the air stream at people or animals.
• Wear appropriate personal protective equipment, such as eye protection, when operating.

3. Pakkauksen sisältö

Varmista pakkauksen purkamisen yhteydessä, että kaikki osat ovat mukana ja vahingoittumattomia:

• 1x FENGDA AS-189 Airbrush Compressor
• 1x englanninkielinen käyttöohje
• 1x Air Filter (pre-installed or separate)

4. Tuote ohiview

Familiarize yourself with the main components of your AS-189 compressor.

Kuva 4.1: Etupuoli view of the FENGDA AS-189 Airbrush Compressor. This image shows the overall compact design, including the motor housing, air tank, pressure regulator, and manometer.

Kuva 4.2: Sivu view of the FENGDA AS-189 Airbrush Compressor, highlighting the pressure regulator with integrated air filter and moisture trap. The manometer for monitoring air pressure is also visible.

Kuva 4.3: Kulma view of the FENGDA AS-189 Airbrush Compressor, providing a clearer perspective of the handle for portability and the various connections. The power switch is located on the side of the motor housing.

5. Asennus

1. Sijoitus: Aseta kompressori vakaalle, tasaiselle alustalle hyvin ilmastoituun tilaan.
2. Airbrush Connection: Connect your airbrush hose to the 1/8" thread compressor connection on the pressure regulator. Ensure a secure, airtight connection.
3. Virtaliitäntä: Plug the power cord into a grounded electrical outlet (220-240 V/50 Hz). The network cable length is approximately 1.8 meters (6 feet).

6. Käyttöohjeet

The AS-189 compressor features a two-position power switch for different operating modes:

• Switch Position 1 (Auto Start/Stop):

  In this mode, the compressor will automatically start when the air tank pressure drops to 3 bar (43 PSI) and automatically stop when the pressure reaches 4 bar (57 PSI). This mode is ideal for maintaining consistent pressure and reducing noise and wear during intermittent use.
• Switch Position 2 (Maximum Pressure):

  In this mode, the compressor will run continuously until it reaches its maximum pressure of 6 bar (86 PSI). It will then maintain this pressure. This mode is suitable for applications requiring continuous high pressure.

Ilmanpaineen säätö: Use the pressure regulator knob to adjust the output air pressure to your desired level (0.0 to 6.0 bar). The manometer will display the current output pressure.

7. Huolto

The FENGDA AS-189 is an oil-free compressor, eliminating the need for oil changes. Regular maintenance is minimal but important for longevity:

• Ilmansuodatin: Periodically check and clean or replace the air filter element to ensure optimal air quality and compressor performance. A clogged filter can reduce airflow and strain the motor.
• Kosteusloukku: The integrated moisture trap should be drained regularly, especially in humid environments, to prevent water from entering your airbrush.
• Puhdistus: Wipe the exterior of the compressor with a damp kangas. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
• Varastointi: When not in use for extended periods, store the compressor in a clean, dry place.

8. Vianmääritys

If you encounter issues with your compressor, refer to the following common solutions:

• Kompressori ei käynnisty:
  • Tarkista, että virtajohto on kunnolla kiinni.
  • Verify the power switch is in position 1 or 2.
  • Varmista, että pistorasia on toimiva.
• Low air pressure or no airflow:
  • Check for leaks in the airbrush hose or connections.
  • Ensure the pressure regulator is set to the desired pressure.
  • Puhdista tai vaihda ilmansuodatin, jos se on tukossa.
  • Check if the airbrush nozzle is clogged.
• Compressor runs continuously in Auto Start/Stop mode:
  • Check for air leaks in the system (hose, airbrush, connections).
  • Varmista, että painekytkin toimii oikein.
• Liiallinen melu tai tärinä:
  • Varmista, että kompressori on vakaalla ja tasaisella alustalla.
  • Tarkista löysien osien varalta.

Jos ongelmat jatkuvat, ota yhteyttä asiakastukeen tai pätevään teknikkoon.

9. Tekniset tiedot

10. Takuu ja tuki

Takuutietoja tai teknistä tukea varten katso ostohetkellä toimitettuja asiakirjoja tai ota yhteyttä jälleenmyyjään. Säilytä ostokuitti ostotodistuksena.