Seiko Clocks QHR201S

Seiko Clocks QHR201S Alarm Clock User Manual

Johdanto

This manual provides detailed instructions for the setup, operation, and maintenance of your Seiko Clocks QHR201S Alarm Clock. This analog alarm clock features radio wave control for accurate timekeeping and a convenient backlight function. Please read this manual thoroughly before using your new alarm clock.

Turvallisuustiedot

  • Älä altista kelloa äärimmäisille lämpötiloille, suoralle auringonvalolle tai korkealle kosteudelle.
  • Vältä kellon pudottamista tai sen altistamista voimakkaille iskuille.
  • Keep the clock away from strong magnetic fields.
  • Älä yritä purkaa tai korjata kelloa itse. Ota yhteyttä pätevään huoltohenkilöstöön.
  • Hävitä käytetyt paristot paikallisten määräysten mukaisesti.

Pakkauksen sisältö

Tarkista, että pakkauksessa on kaikki tarvittavat osat:

  • Seiko Clocks QHR201S Alarm Clock
  • 1 x AA-paristo
  • Käyttöopas (tämä asiakirja)

Tuote loppuview

The Seiko Clocks QHR201S is a compact, modern analog alarm clock designed for clarity and ease of use. Its radio wave control feature ensures precise timekeeping.

Seiko Clocks QHR201S alarm clock, front view, hopea casing with white analog dial, black hands, and a button on the top right.
Kuva 1: Edessä view of the Seiko Clocks QHR201S Alarm Clock. The clock features a silver rectangular casing, a white analog dial with black hour, minute, and second hands, and clear black numerals. The text "SEIKO" and "RADIO WAVE CONTROL" are visible on the dial. A circular button is located on the top right of the casing.

Key components include the analog dial for time display, control knobs/buttons (typically on the back or side) for setting time and alarm, and a top button for backlight activation and snooze function.

Asennus

1. Akun asennus

  1. Paikanna paristolokeron kansi kellon takaa.
  2. Irrota kansi liu'uttamalla tai nostamalla sitä.
  3. Aseta yksi AA-paristo lokeroon varmistaen, että positiiviset (+) ja negatiiviset (-) navat ovat oikein lokeron sisällä olevien merkintöjen kanssa.
  4. Aseta paristolokeron kansi kunnolla takaisin paikalleen.

2. Initial Time Setting (Radio Wave Control)

Upon battery installation, the clock will automatically attempt to receive the radio time signal. This process may take several minutes to an hour, depending on your location and signal strength. During this time, the hands may move rapidly until the correct time is set.

  • Aseta kello ikkunan lähelle paremman signaalin vastaanoton saavuttamiseksi.
  • Avoid placing the clock near electronic devices that may cause interference.
  • Once the signal is received, the clock will automatically adjust to the correct local time, including daylight saving time changes.

Käyttöohjeet

Hälytyksen asettaminen

  1. Locate the alarm setting knob, usually on the back of the clock.
  2. Rotate the knob to move the alarm hand to your desired alarm time.
  3. Locate the alarm ON/OFF switch (often a small slider or button). Set it to the ON position to activate the alarm.

Taustavalon käyttäminen

Press the button located on the top right of the clock casing to activate the backlight. The backlight will illuminate the dial for a few seconds, allowing you to read the time in low-light conditions.

Torkkutoiminto

When the alarm sounds, press the top button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes).

Hälytyksen pysäyttäminen

To completely stop the alarm, move the alarm ON/OFF switch to the OFF position.

Huolto

Puhdistus

Wipe the clock's casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

Akun vaihto

Replace the AA battery when the clock's display becomes dim, the backlight weakens, or the clock stops functioning. Follow the battery installation steps outlined in the Setup section.

Vianetsintä

  • Clock not displaying correct time: Ensure the battery is correctly installed and has sufficient power. Allow time for the radio wave signal to be received. Try moving the clock to a different location, preferably near a window.
  • Hälytys ei soi: Check that the alarm ON/OFF switch is in the ON position. Verify that the alarm time is set correctly.
  • Taustavalo ei toimi: Replace the battery if it is low. Ensure the top button is being pressed firmly.
  • No radio signal reception: Ensure the clock is not near sources of interference (e.g., TVs, computers, large metal objects). Try repositioning the clock.

Tekniset tiedot

  • Merkki: Seiko Clocks
  • Mallinumero: QHR201S
  • Väri: Hopea
  • Mitat (P x L x K): 7.5 x 3.81 x 4.4 cm
  • Paino: 140 grammaa
  • Materiaali: Muovi
  • Ominaisuudet: Backlight, Radio Wave Control
  • Virtalähde: 1 x AA-paristo (mukana)
  • Näyttötyyppi: Analoginen
  • Tyyli: Moderni

Takuu ja tuki

Jos tarvitset takuutietoja tai teknistä tukea, katso ostohetkellä toimitettuja asiakirjoja tai ota yhteyttä jälleenmyyjään. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.