Inventum MK350 Milk Frother

Johdanto

Thank you for choosing the Inventum MK350 Milk Frother. This appliance is designed to quickly and efficiently froth milk for various beverages or heat milk to your desired temperature. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

Tärkeitä turvallisuusohjeita

• Lue kaikki ohjeet ennen käyttöä.
• Do not immerse the frother unit or power base in water or other liquids.
• Varmista voltagLaitteessa ilmoitettu e vastaa paikallista verkkovirtaasitage ennen yhdistämistä.
• Tämä laite on tarkoitettu vain kotitalouskäyttöön. Älä käytä ulkona.
• Aseta laite aina tasaiselle, tukevalle ja kuumuutta kestävälle alustalle.
• Älä käytä laitetta, jos johto tai pistoke on vaurioitunut, tai jos laitteessa on toimintahäiriö tai se on vaurioitunut millään tavalla.
• Pidä laite ja sen johto poissa lasten ulottuvilta.
• Älä koske kuumia pintoja. Käytä kahvoja tai nuppeja.
• Irrota pistoke pistorasiasta, kun et käytä ja ennen puhdistusta. Anna jäähtyä ennen osien pukemista tai irrottamista ja ennen laitteen puhdistamista.
• Älä käytä lisälaitteita, joita valmistaja ei suosittele.

Tuote loppuview

Familiarize yourself with the components of your Inventum MK350 Milk Frother.

Kuva 1: This image displays the Inventum MK350 Milk Frother from the front, showcasing its stainless steel upper body, black base, handle, and the control panel with indicator lights and power button.

Kuva 2: Yksi puoli view of the Inventum MK350 Milk Frother, emphasizing the ergonomic handle and the pouring spout integrated into the stainless steel jug.

Kuva 3: A view into the interior of the milk frother, highlighting the non-stick coating and the small central pin where the frothing whisk is attached.

Kuva 4: A close-up image of the small, detachable whisk with a spring coil, designed for creating milk foam. This whisk attaches to the central pin inside the frother.

Kuva 5: The separate power base for the milk frother, featuring a central connector for the frother unit and a power cord.

Komponentit:

• Vaahdotuskannu: Stainless steel jug with non-stick interior.
• Kahva: Ergonomic handle for safe pouring.
• Kansi: Transparent lid (not explicitly shown but implied for frother).
• Vaahdotusvispilä: Detachable whisk with spring coil for frothing.
• Lämmitysvispilä: (If applicable, otherwise use frothing whisk for heating too). The input suggests one whisk for frothing.
• Ohjauspaneeli: Power button and indicator lights for different functions.
• Tehopohja: Cordless 360-degree rotating base with power cord.

Asennus

1. Purkaminen: Poista huolellisesti kaikki pakkausmateriaalit. Säilytä pakkaus myöhempää säilytystä tai kuljetusta varten.
2. Ensimmäinen puhdistus: Before first use, clean the frother jug and whisk according to the 'Maintenance and Cleaning' section. Wipe the exterior of the power base with a damp kangas.
3. Sijoitus: Place the power base on a dry, stable, and level surface away from water sources and heat.
4. Vispilin kiinnitys: Insert the frothing whisk onto the central pin inside the frother jug. Ensure it is securely seated.

Käyttöohjeet

The Inventum MK350 offers options for hot frothing, cold frothing, and heating milk.

1. Prepare the Frother: Ensure the frothing whisk is correctly installed inside the jug.
2. Lisää maitoa: Pour cold milk into the frother jug. Observe the internal markings for maximum fill levels:
   • varten vaahtoamista (hot or cold): Do not exceed the 115 ml merkki.
   • varten vain lämmitys (without frothing): Do not exceed the 240 ml merkki.

   Note: Using full-fat milk typically yields the best frothing results.
3. Aseta voima-alustalle: Position the frother jug onto the power base.
4. Valitse toiminto:
   • varten hot frothing or lämmittää maitoa: Press the power button once. The red indicator light will illuminate, and the frother will begin operation.
   • varten kylmä vaahdotus: Press and hold the power button for approximately 2 seconds. The blue indicator light will illuminate, and the frother will begin cold frothing.
5. Toiminta: The frother will operate for approximately 90 seconds for frothing, or until the milk reaches the optimal temperature for heating, then automatically switch off. The indicator light will turn off.
6. Palvella: Carefully remove the frother jug from the power base and pour the frothed or heated milk into your beverage.
7. Jäähtyä: Allow the frother to cool down for a few minutes between uses to ensure optimal performance and prevent overheating.

Huolto ja puhdistus

Regular cleaning ensures the longevity and hygiene of your milk frother. Always unplug the appliance before cleaning.

1. Irrota pistoke ja viilennä: Disconnect the power base from the mains outlet and allow the frother jug to cool down completely after use.
2. Poista vispilä: Carefully remove the frothing whisk from the central pin inside the jug.
3. Clean Frother Jug: The frother jug is Vain käsinpesu. Wash the interior of the jug with warm, soapy water and a soft sponge or cloth. The non-stick coating facilitates easy cleaning. Rinse thoroughly and dry immediately. Do not use abrasive cleaners or scouring pads, as these can damage the non-stick surface.
4. Puhdas vispilä: Wash the frothing whisk with warm, soapy water. Use a small brush if necessary to clean the spring coil. Rinse and dry thoroughly.
5. Puhdas ulkopuoli: Pyyhi vaahdotuskannun ja tehoalusta ulkopuolelta vedellä.amp liinalla. Älä upota virtalähdettä veteen.
6. Varastointi: Once clean and dry, store the frother with the whisk inside the jug, or in a safe place.

Vianetsintä

If you encounter issues with your Inventum MK350 Milk Frother, refer to the following common problems and solutions:

• Frother does not start:
  • Varmista, että virtalähde on kytketty tukevasti toimivaan pistorasiaan.
  • Verify the frother jug is correctly placed on the power base.
  • Paina virtapainiketta lujasti.
• Milk is not frothing or frothing poorly:
  • Check that the frothing whisk is properly installed on the central pin.
  • Ensure the milk level does not exceed the maximum fill line for frothing (115 ml).
  • Use cold, fresh milk. Full-fat milk generally froths better than low-fat or skim milk.
  • Clean the whisk and the interior of the jug thoroughly, as residue can affect performance.
• Milk is not heating:
  • Ensure the milk level does not exceed the maximum fill line for heating (240 ml).
  • Confirm the correct function (hot frothing/heating) was selected.
  • Allow the appliance to cool down if it has been used multiple times in quick succession, as an overheating protection mechanism might be active.
• Indicator lights are not working:
  • Check power connection and ensure the frother is operating. If the frother is working but lights are off, contact customer support.

If the problem persists after attempting these solutions, please contact Inventum customer support or your retailer.

Tekniset tiedot

Takuu ja tuki

For information regarding the warranty period and conditions for your Inventum MK350 Milk Frother, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. For technical support, spare parts, or service inquiries, please contact Inventum customer service directly or visit their official websivusto yhteystiedot.