Eiko 43A/CL/H-120V

Eiko Halogen A19 43W Clear 120V Bulb User Manual

Model: 43A/CL/H-120V

1. Tärkeitä turvallisuustietoja

Please read all instructions carefully before installing or using this Eiko Halogen A19 bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Sähköiskun vaara: Katkaise aina virta valaisimesta sulakekaapista tai sulaketaulusta ennen asennusta, irrottamista tai tarkastusta.
  • Palovamman vaara: Halogen bulbs operate at high temperatures. Do not touch the bulb while it is operating or immediately after it has been turned off. Allow the bulb to cool completely before handling.
  • Oikea hävitys: Hävitä käytetyt lamput paikallisten määräysten mukaisesti.
  • Vain sisäkäyttöön: Tämä lamppu on suunniteltu sisäkäyttöön sopivissa valaisimissa.
  • Do Not Exceed Wattage: Ensure the fixture's maximum wattage rating is not exceeded. This bulb is 43W.
  • Käsittele varovasti: Avoid touching the glass portion of the bulb with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves if necessary.

2. Asennus ja asennus

Follow these steps to safely install your Eiko Halogen A19 bulb:

  1. Sammuta virta: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the main circuit breaker or fuse box.
  2. Salli jäähdytys: Jos vaihdat vanhan lampun, varmista, että se on jäähtynyt kokonaan ennen kuin kosket siihen.
  3. Poista vanha polttimo: Irrota vanha lamppu varovasti kannasta kiertämällä vastapäivään.
  4. Tarkasta kiinnitys: Tarkista valaisimen pistorasia vaurioiden tai roskien varalta. Varmista, että se on puhdas ja kuiva.
  5. Asenna uusi lamppu: Gently screw the Eiko Halogen A19 bulb clockwise into the socket until it is snug. Do not overtighten.
  6. Palauta virta: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch.
Eiko Halogen A19 43W Clear 120V Bulb

Image 1: Eiko Halogen A19 43W Clear 120V Bulb. This image shows the clear glass bulb with a standard screw-in base, typical of an A19 shape.

3. Käyttöohjeet

The Eiko Halogen A19 bulb operates like a standard incandescent bulb. Once installed, simply use the light fixture's switch to turn the bulb on or off.

  • Välitön päällä: The bulb provides instant full brightness upon activation.
  • Valon laatu: This halogen bulb produces a brighter, whiter light compared to traditional incandescent bulbs, enhancing visibility and color rendition.
  • himmennys: If used in a dimmable fixture with a compatible dimmer switch, this bulb can be dimmed. Ensure your dimmer is rated for halogen or incandescent loads.

4. Huolto

Minimal maintenance is required for your Eiko Halogen A19 bulb. However, following these guidelines can help ensure optimal performance and longevity:

  • Puhdistus: Jos lamppu pölyää, varmista, että virta on katkaistu ja lamppu on jäähtynyt. Pyyhi lasi varovasti puhtaalla, kuivalla ja nukkaamattomalla liinalla. Älä käytä nestemäisiä puhdistusaineita.
  • Korvaus: Halogen bulbs, like all light sources, will dim over time and eventually burn out. For consistent light output, consider replacing bulbs when a noticeable decrease in brightness occurs. It is often recommended to replace bulbs in multi-bulb fixtures at the same time for uniform light.
  • Käsittely: When replacing, avoid touching the new bulb's glass with bare hands. Oils from your skin can create hot spots and reduce bulb life. Use a clean cloth or gloves.

5. Vianmääritys

If your Eiko Halogen A19 bulb is not functioning as expected, refer to the following common issues and solutions:

OngelmaMahdollinen syyRatkaisu
Polttimo ei syty.
  • Laitteeseen ei tule virtaa.
  • Polttimo ei ole kierretty kunnolla kiinni.
  • Lamppu on viallinen tai sen käyttöikä on päättynyt.
  • Valaisimen kytkin on pois päältä.
  • Tarkista katkaisija/sulake.
  • Ensure bulb is securely screwed into the socket (power off first).
  • Vaihda polttimo uuteen.
  • Turn on the fixture switch.
Lamppu välkkyy.
  • Loose connection in the socket.
  • Yhteensopimaton himmennin.
  • Voitage vaihtelut.
  • Turn off power, then tighten the bulb.
  • Ensure dimmer is compatible with halogen bulbs.
  • Ota yhteyttä sähköasentajaan, jostagOngelmat jatkuvat.
Polttimo palaa nopeasti.
  • Ylitehotage telineeseen.
  • Frequent power surges.
  • Liiallinen tärinä.
  • Touching glass with bare hands during installation.
  • Verify fixture's maximum wattage.
  • Consider a surge protector for the circuit.
  • Ensure fixture is stable.
  • Handle new bulbs with a cloth or gloves.

6. Tuotteen tekniset tiedot

Detailed specifications for the Eiko Halogen A19 43W Clear 120V bulb:

  • Merkki: Eiko
  • Mallinumero: 43A/CL/H-120V
  • Valon tyyppi: Halogeeni
  • Wattage: 43 wattia
  • Lampun muodon koko: A19
  • Voitage: 120 volttia
  • Värilämpötila: 2900 kelviniä
  • Viimeistely: Selkeä
  • Materiaali: Tungsten (filament)
  • Tuotteen mitat: Noin 1 x 1 x 2.7 tuumaa
  • Tuotteen paino: Noin 3.2 unssia
  • Erityiset käyttötarkoitukset: General purpose lighting, lamps

7. Takuu ja tuki

7.1. Rajoitettu takuu

Eiko products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary. Please retain your proof of purchase for warranty claims.

7.2. Asiakastuki

For technical assistance, warranty inquiries, or further information regarding your Eiko Halogen A19 bulb, please contact Eiko customer support. Refer to the official Eiko webKatso ajantasaisimmat yhteystiedot sivustolta tai tuotepakkauksesta.