VOX StompLab 1G Multi-Effects Modeling Guitar Pedal

Johdanto

The VOX StompLab 1G is a compact multi-effects modeling pedal designed for guitarists. It offers a wide array of sounds and effects, categorized by musical style for ease of use. This manual provides essential information for setting up, operating, and maintaining your StompLab 1G pedal.

Kuva 1: Etuosa view of the VOX StompLab 1G Multi-Effects Modeling Guitar Pedal.

Tuotteen ominaisuudet

• 100 esiasetettua ohjelmaa: A total of 100 preset programs are categorized into styles such as rock, blues, metal, and pop, allowing for quick sound selection.
• Helppokäyttöinen käyttöliittymä: Designed for intuitive operation, enabling even novice users to instantly access desired sounds.
• 103 Modeling Effects: Provides 103 types of modeling effects for diverse sound shaping.
• Advanced Sound Engine: Each effect model utilizes a sound engine derived from the acclaimed VOX VT+ series of modeling amps and ToneLab series multi-effect units.
• 20 User Programs: Allows users to edit and save up to 20 custom programs.

Asennus

Powering the StompLab 1G

The StompLab 1G can be powered by either an AC adapter (9V DC) or four AA batteries. An AC adapter is recommended for stable performance, especially during extended use.

• Verkkolaitteen liitäntä: Connect the 9V DC power adapter to the DC 9V input jack on the rear panel of the unit.
• Akun asennus: For portable use, install four AA batteries into the battery compartment located on the underside of the pedal. Refer to the "Maintenance" section for detailed battery installation instructions.

Laitteiden liittäminen

Connect your guitar to the INPUT jack and your amplifier or headphones to the OUTPUT/PHONES jack. The OUTPUT/PHONES jack supports both stereo and mono connections.

Figure 2: Rear panel connections for input, output, and DC 9V power.

Käyttöohjeet

The StompLab 1G features an intuitive control layout for easy sound manipulation.

Hallitseeview

• CATEGORY Knob: Use this knob to select from various musical style categories (e.g., Rock & Roll, Blues, Pop, Jazz/Fusion, Ballad, Hard Rock, Metal, Hard Core, Other). Each category contains multiple preset programs.
• GAIN / VALUE1 Knob: Adjusts the gain level of the selected effect or changes the value of parameters during editing.
• LEVEL / VALUE2 Knob: Controls the overall output level or changes the value of parameters during editing.
• FOOTSWITCHES (DOWN/UP): These footswitches allow you to navigate through programs (DOWN/UP) and activate the Bypass/Tuner function by holding both simultaneously.
• MUOKKAA-painike: Used to enter edit mode for customizing programs.
• EFFECT TYPE Button: Selects the effect type within a program during editing.

Figure 3: Control panel with Category, Gain, Level knobs, and footswitches.

Valitse ohjelmat

1. Käännä KATEGORIA knob to select a musical style.
2. Käytä ALAS ja UP footswitches to cycle through the preset programs within the selected category. The display will show the program number.

Virittimen käyttäminen

To activate the built-in tuner, press and hold both the ALAS ja UP footswitches simultaneously. The display will show tuning information. Press either footswitch again to exit tuner mode.

Huolto

Akun vaihto

To replace the batteries in your StompLab 1G, follow these steps:

1. Varmista, että laite on sammutettu ja irrotettu kaikista virtalähteistä.
2. Käännä laite varovasti ylösalaisin.
3. Unscrew the four rubber feet on the bottom panel. These feet also secure the battery compartment cover.
4. Remove the bottom panel to access the battery holder.
5. Replace the old AA batteries with four new ones, ensuring correct polarity (+/-).
6. Securely reattach the bottom panel and screw the four rubber feet back into place.

Puhdistus

Pyyhi laite pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.

Vianetsintä

• Ei ääntä:
  • Tarkista kaikki kaapeliliitännät (kitara tuloon, lähtö amp/headphones).
  • Varmista, että virtalähde on kytketty kunnolla tai paristot on asennettu ja ladattu oikein.
  • Varmista, että laite on päällä.
  • Check the volume levels on the StompLab 1G, your guitar, and your amplifier/kuulokkeet.
• Unexpected Sound/Distortion:
  • Adjust the GAIN and LEVEL knobs.
  • Ensure the correct program/effect is selected for your desired sound.
  • Tarkista vialliset kaapelit.
• Laite ei käynnisty:
  • Jos käytät paristoja, vaihda ne uusiin.
  • If using an AC adapter, ensure it is the correct 9V DC type and is functioning properly.

Tekniset tiedot

Mitä laatikossa on

• VOX StompLab 1G Multi-Effects Modeling Guitar Pedal
• Virtalähde
• Käyttöopas (tämä asiakirja)
• 4 AA-paristoa (esiasennettu tai toimitetaan erikseen)

Takuu ja tuki

Takuutietoja ja teknistä tukea varten katso virallinen VOX website or contact your local VOX dealer. Keep your purchase receipt as proof of purchase for warranty claims.