RAB Lighting FFLED39

RAB Lighting FFLED39 Future Flood LED Light User Manual

Model: FFLED39

1. Tuote ohiview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

RAB Lighting FFLED39 Future Flood LED Light

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Tärkeimmät ominaisuudet:

  • Teho: 39-watt LED
  • Värilämpötila: 5100K kylmä valkoinen
  • Elinikä: 100,000 hours based on LM-80 tests
  • LED: it: Three multi-chip 13-watt high-performance LEDs
  • Optiikka: NEMA type 7H x 6V with Air-flow technology heatsink
  • Heijastin: Semi-specular anodized aluminum
  • Tiivisteet: Korkean lämpötilan silikoni
  • Viimeistely: Bronze chip and fade-resistant polyester powder coat
  • Voitage: 120-volt to 277-volt operation

2. Turvallisuustiedot

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

  • Sähköturvallisuus: Asennuksen saa suorittaa vain pätevä sähköasentaja kaikkien kansallisten ja paikallisten sähkömääräysten mukaisesti. Varmista, että virta on katkaistu sulakkeesta ennen asennusta tai huoltoa.
  • Maadoitus: The fixture must be properly grounded to prevent potential electric shock.
  • Asennus: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
  • Käyttölämpötila: Do not operate the fixture outside its specified temperature range.
  • LED: it: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Asennus

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Tarvittavat työkalut:

  • Ruuvimeisseli (Phillips ja tasapää)
  • Sivuleikkurit
  • Pihdit
  • Drill (if mounting surface requires pilot holes)
  • Säädettävä jakoavain

Asennusvaihtoehdot:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Slipfitter mount for RAB Lighting FFLED39

Kuva 2: Esimample of a Slipfitter Mount (optional accessory)

Asennusvaiheet:

  1. Katkaise virta: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage testaaja.
  2. Valmistele asennuspinta: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
  3. Johdinliitännät:
    • Connect the black wire from the fixture to the hot (L) wire from the power supply.
    • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
    • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
    • Käytä sopivia liittimiä ja varmista, että kaikki liitännät ovat tukevasti kiinni.
  4. Kiinnitysteline: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
  5. Säädä tavoite: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
  6. Palauta virta: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Käyttö

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Vakiotoiminta:

  • Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
  • Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Photocell for automatic light control

Kuva 3: Esimample of a Photocell (optional accessory)

5. Huolto

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Puhdistus:

  • Ulkopuoli: Puhdista laitteen ulkopinta säännöllisesti pehmeällä,amp liinalla lian, pölyn ja roskien poistamiseen. Älä käytä hankaavia puhdistusaineita tai liuottimia.
  • Linssi: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Tarkastus:

  • Periodically inspect the fixture for any signs of damage, loose connections, or wear.
  • Varmista, että kaikki kiinnitystarvikkeet pysyvät tiukasti kiinni ja tukevasti.
  • If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Vianmääritys

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

OngelmaMahdollinen syyRatkaisu
Valo ei syty
  • Valaisimeen ei ole virtaa
  • Löysä johtoliitäntä
  • Viallinen kytkin tai sulake
  • Photocell malfunction (if applicable)
  • Tarkista sulake ja seinäkytkin.
  • Varmista, että kaikki johdot ovat kunnolla kiinni (varmista, että virta on ensin katkaistu).
  • Test switch/breaker; replace if faulty.
  • Inspect photocell for obstructions or damage; replace if necessary.
Valo välkkyy tai himmenee
  • Epävakaa virtalähde
  • Löysä johdotus
  • Incompatible dimmer (if used)
  • Ota yhteyttä sähköasentajaan tarkistaaksesi virtalähteen vakauden.
  • Tarkista ja kiristä kaikki johtoliitännät.
  • Ensure any dimmer switch used is compatible with LED fixtures.
Valo palaa päivän aikana
  • Valokenno tukkeutunut tai viallinen
  • Incorrect wiring of photocell
  • Clear any obstructions from the photocell.
  • Verify photocell wiring according to its instructions. Replace if faulty.

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Tekniset tiedot

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

ErittelyArvo
MallinumeroFFLED39
MerkkiRAB-valaistus
Wattage39 wattia
Voitage120-277 volttia
Valon lähdeLED
Vaalea väriViileä valkoinen
Värilämpötila5100 kelviniä
Kirkkaus15000 lumenia
Sisä-/ulkokäyttöUlkona
AsennustyyppiSeinäteline
MateriaaliAlumiini, Muovi
ViimeistelytyyppiPronssi
Tuotteen mitat (P x L x K)11 cm P x 7.5 cm L x 10 cm K
Tuotteen paino10.23 puntaa
VedenkestävyystasoVedenkestävä
Elinikä100,000 tuntia
100,000-hour LED lifespan icon

Figure 4: Indication of 100,000-hour LED lifespan

8. Takuu ja tuki

Valmistajan takuu:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1 vuoden valmistajan takuu ostopäivästä lukien. Tämä takuu kattaa materiaali- ja valmistusvirheet normaalin käytön ja huollon aikana.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Asiakastuki:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting websivustolta ajantasaiset yhteystiedot.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.