1. Johdanto
Thank you for choosing the Kapego Ultra 70 Dimmable LED Power Supply. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your device. Please read this manual thoroughly before installation and keep it for future reference.
1.1 Turvallisuusvaroitukset
- Sähköinen vaara: Asennuksen ja huollon saa suorittaa ainoastaan pätevä sähköasentaja paikallisten sähkömääräysten ja -määräysten mukaisesti.
- Disconnect power before installation, maintenance, or troubleshooting.
- Älä käytä laitetta, jos se on vaurioitunut.
- Varmista riittävä ilmanvaihto ylikuumenemisen estämiseksi.
- This device is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not expose to moisture or water.
2. Tuote ohiview
The Kapego Ultra 70 is a constant voltage electronic transformer designed for dimmable LED lighting applications. It features phase-cut dimming control, allowing for smooth adjustment of light intensity when paired with compatible dimmers.
2.1 Tärkeimmät ominaisuudet
- Materiaali: Durable plastic housing.
- Väri: Musta viimeistely.
- Teholähtö: 0-70.00W, suitable for various LED loads.
- Ohjaus: Phase-cut dimming for compatibility with leading and trailing edge dimmers.
- Tulo Voltage: 220-240V AC, 50-60Hz.
- Lähtö Voltage: 12V AC.
2.2 Tuotteen kuva
3. Asennus ja asennus
Tärkeää: All installation work must be carried out by a qualified electrician. Ensure power is disconnected at the main circuit breaker before proceeding.
- Virran katkaisu: Turn off the main power supply to the circuit where the power supply will be installed. Verify that the power is off using a voltage testaaja.
- Asennus: Choose a suitable, dry location for mounting the power supply, ensuring adequate ventilation. The device is not waterproof (IP20). Secure the power supply using appropriate fasteners.
- Input Wiring (PRI): Connect the main AC power supply (220-240V AC, 50-60Hz) to the input terminals marked 'PRI' (L and N). Use appropriate wire gauges (0.75-2.50 mm² recommended).
- Connect the Live (L) wire to the 'L' terminal.
- Connect the Neutral (N) wire to the 'N' terminal.
- Output Wiring (SEC): Connect your 12V AC LED lighting fixtures to the output terminals marked 'SEC'. Ensure the total wattage of the connected LED fixtures does not exceed 70W. Use appropriate wire gauges (0.75-2.50 mm² recommended).
- Dimmer Connection (Optional): If using a dimmer, connect it on the primary (input) side of the power supply, following the dimmer manufacturer's instructions. This power supply is designed for phase-cut dimmers.
- Lopputarkastus: Double-check all connections for proper polarity and secure fastening. Ensure no bare wires are exposed.
- Virran palautus: Palauta virta piiriin.
4. Käyttöohjeet
Once properly installed, the Kapego Ultra 70 Dimmable LED Power Supply operates automatically when power is supplied. If a compatible phase-cut dimmer is connected to the input, you can adjust the brightness of the connected LED lights using the dimmer control.
- Virta päälle/pois: Use the main light switch or dimmer switch to turn the connected LED lights on or off.
- himmennys: Rotate or adjust the dimmer control to increase or decrease the light output. Ensure the dimmer is compatible with phase-cut electronic transformers.
5. Huolto
The Kapego Ultra 70 Dimmable LED Power Supply requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Puhdistus: Ensure power is disconnected before cleaning. Wipe the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids.
- Tarkastus: Periodically inspect the wiring and connections for any signs of damage, loose connections, or overheating. Address any issues promptly.
- Ilmanvaihto: Ensure that the power supply's ventilation openings are not obstructed.
6. Vianmääritys
If you experience issues with your Kapego Ultra 70 Dimmable LED Power Supply, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei valotehoa |
|
|
| Välkkyvä tai epävakaa valo |
|
|
| Himmennys ei toimi |
|
|
If the problem persists after attempting these solutions, please contact a qualified electrician or customer support.
7. Tekniset tiedot
| Parametri | Arvo |
|---|---|
| Mallinumero | 180515 |
| Merkki | Deko-Light (Kapego) |
| Tulo Voltage | 220-240 V AC, 50-60Hz |
| Tulovirta | 0.29A (PRI) |
| Lähtö Voltage | 12V AC (SEC: 11.5V~eff) |
| Lähtövirta | 0-6.0A |
| Lähtöteho | 0-70.00W |
| Himmennyksen ohjaus | Phase Cut (Leading/Trailing Edge) |
| Tehokerroin (λ) | ≥ 0.99 |
| Materiaali | Muovi |
| Väri | Musta |
| IP-luokitus | IP20 (ei vesisuojaa) |
| Operating Temperature (ta) | 50 °C |
| Case Temperature (tc) | 80 °C |
| Tuotteen mitat (P x L x K) | 115 mm x 45 mm x 28 mm (4.53 x 1.77 x 1.10 tuumaa) |
| Paino | 120 grammaa |
| Johdon poikkileikkaus | 0.75-2.50 mmXNUMX |
8. Takuu ja tuki
This Kapego product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
8.1 Asiakastuki
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the packaging or the manufacturer's websivusto yhteystiedot.
Valmistaja: Kapego (Deko-Light)
Malli: 180515