Johdanto
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM HCI-TC 70W/830 WDL G8.5 Metal Halide LampLue nämä ohjeet huolellisesti ennen käyttöä ja säilytä ne myöhempää tarvetta varten.
The OSRAM HCI-TC 70W/830 WDL G8.5 is a high-performance metal halide lamp featuring POWERBALL ceramic technology and UV filter technology, designed for outdoor use. It provides a warm white light (830 WDL) with a high color rendering index, making it suitable for various lighting applications.
Tärkeitä turvallisuustietoja
- Sähköiskun vaara: Installation and maintenance should only be performed by a qualified electrician. Ensure power is disconnected before handling the lamp.
- Palovamman vaara: Lamptoimivat korkeissa lämpötiloissa. Anna l:namp jäähtyä täysin ennen käsittelyä.
- UV-säteily: Tämä lamp features UV filter technology, but prolonged direct exposure to light from any high-intensity discharge lamp tulisi välttää.
- Lamp Repeämä: Käytä lamps only in suitable enclosed luminaires to contain hot particles in case of lamp repeämä.
- Liitäntälaitteen yhteensopivuus: Use only with appropriate electronic or magnetic ballasts designed for metal halide lamps of this wattage and type. Incompatible ballasts can lead to lamp failure or safety hazards.
- Hävittäminen: Hävitä lamppaikallisten määräysten mukaisesti, koska ne saattavat sisältää elohopeaa.
Asennus ja asennus
Asennusta edeltävät tarkastukset
- Verify that the luminaire and ballast are compatible with a 70W G8.5 metal halide lamp.
- Ensure the power supply is disconnected at the circuit breaker before beginning installation.
- Tarkista lamp for any visible damage. Do not install a damaged lamp.
Asennusvaiheet
- Ensure the luminaire is clean and free from debris.
- Carefully insert the G8.5 base of the lamp sisään lamp holder. Ensure it is seated firmly and correctly. Do not force the lamp.
- Close the luminaire cover securely.
- Palauta virta piiriin.
Image: The OSRAM HCI-TC 70W/830 WDL G8.5 metal halide lamp, showing its compact design and G8.5 base. This lamp is designed for high-intensity discharge lighting applications.
Huomautus: Käsittele aina lamp by its base to avoid touching the glass envelope, as oils from skin can reduce lamp elämää.
Käyttöohjeet
- Ensimmäinen sytytys: Upon first ignition or after a power interruption, the lamp will require a short warm-up period to reach full brightness and stable color.
- Lämpenemisaika: Lamp typically reaches full light output within 2-5 minutes after ignition.
- Uudelleensytytysaika: Jos lamp is switched off, it requires a cooling period before it can be re-ignited. This re-strike time is typically 5-15 minutes, depending on ambient temperature and ballast type. Attempting to re-ignite too soon can damage the lamp tai painolastia.
- Käyttöasento: Lamp is designed for operation in any position (h90), but refer to your luminaire's instructions for specific requirements.
Huolto
Puhdistus
Varmista, että lamp is cool and power is disconnected before cleaning. Gently wipe the outer glass envelope with a clean, dry, lint-free cloth. Do not use abrasive cleaners or liquids that could leave residues or damage the lamp.
Lamp Vaihto
Vaihda lamp when it reaches the end of its rated average lifespan or if it exhibits signs of failure (e.g., flickering, reduced light output, failure to ignite). Always replace with an OSRAM HCI-TC 70W/830 WDL G8.5 lamp or an equivalent approved by OSRAM.
- Katkaise virta valaisimesta.
- Salli lamp jäähtyä kokonaan.
- Open the luminaire and carefully remove the old lamp by gently pulling it straight out from the G8.5 socket.
- Asenna uusi lamp as described in the "Installation Steps" section.
Hävittäminen
Metallihalogenidi lamps contain small amounts of mercury and other materials that require special disposal. Do not dispose of lamps in general household waste. Contact your local waste management authority for proper recycling or disposal instructions.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Lamp ei syty. | No power supply; incorrect wiring; faulty lamp; faulty ballast; lamp not seated correctly. | Check power supply and circuit breaker. Verify wiring. Re-seat lamp. Test with a known good lamp or ballast (if safe to do so). Consult a qualified electrician. |
| Lamp välkkyy tai sammuu sykleissä. | l:n loppuamp life; incorrect ballast; unstable power supply; overheating luminaire. | Vaihda lamp. Ensure ballast is compatible. Check power supply stability. Ensure proper ventilation for the luminaire. |
| Vähentynyt valoteho. | l:n loppuamp life; dirty lamp or luminaire reflector; incorrect ballast. | Vaihda lampPuhdista lamp and luminaire. Verify ballast compatibility. |
| Lamp uudelleen syttyminen kestää liian kauan. | Insufficient cooling time; faulty ignitor/ballast. | Allow adequate cooling time (5-15 minutes). Consult a qualified electrician to check ignitor/ballast. |
Tekniset tiedot
| Merkki | OSRAM |
| Mallinumero | HCI-TC 70W/830 WDL G8.5 (Internal: 4008321681799, 999017835046) |
| Valon tyyppi | Metallihalogenidi |
| Wattage | 70 wattia |
| Voitage | 96 volttia |
| Vaalea väri | Warm White (830 WDL) |
| Värintoistoindeksi (CRI) | 89 |
| Sisä-/ulkokäyttö | Ulkona |
| Materiaalityyppi | Keraaminen, Metalli |
| Pohjatyyppi | G8.5 |
| Keskimääräinen elinikä | 15,000 hours (with electronic ballast); 12,000 hours (with magnetic ballast) |
| Tuotteen paino | 9 grammaa |
Takuutiedot
OSRAM products are manufactured to high quality standards. For specific warranty terms and conditions applicable to your region and product, please refer to the official OSRAM website or contact OSRAM customer service. Keep your proof of purchase for warranty claims.
Asiakastuki
If you have any questions, require technical assistance, or need further support regarding your OSRAM HCI-TC 70W/830 WDL G8.5 Metal Halide Lamp, please visit the official OSRAM website or contact their customer service department. Contact information can typically be found on the OSRAM websivusto tai tuotepakkaus.
OSRAMin virallinen Websivusto: www.osram.com