Peiying NB-3000

Peiying NB-3000 Active Car Subwoofer Instruction Manual

Malli: NB-3000

1. Johdanto

Thank you for choosing the Peiying NB-3000 Active Car Subwoofer. This compact and powerful audio solution is designed to enhance your in-car listening experience by delivering deep, rich bass. Its ultra-flat design allows for versatile placement in vehicles with limited space. Please read this manual thoroughly before installation and operation to ensure proper use and maximize performance.

2. Turvallisuustiedot

VAROITUS: Improper installation or use can lead to serious injury or damage to the product and vehicle.

  • Irrota aina ajoneuvon akun negatiivinen napa ennen sähkötöiden aloittamista.
  • Varmista, että kaikki johdot on vedetty ja kiinnitetty oikein, jotta ne eivät puristu, katkea tai oikosulje.
  • Käytä virta- ja maadoitusliitännöissä tässä käyttöoppaassa määriteltyjä sopivan paksuisia johdotuksia.
  • Do not install the subwoofer in locations where it may obstruct the driver's view tai häiritä ajoneuvon toimintaa.
  • Avoid installing the unit in areas exposed to direct sunlight, excessive heat, moisture, or dust.
  • Jos olet epävarma jostakin asennusprosessin osasta, ota yhteyttä ammattimaiseen auton äänentoistolaitteiden asentajaan.
  • Do not attempt to open or modify the unit. This will void the warranty and may cause damage.

3. Tuote ohiview ja Ominaisuudet

The Peiying NB-3000 is an active (amplified) car subwoofer designed for powerful bass reproduction.

Tärkeimmät ominaisuudet:

  • 20 cm (8-inch) active subwoofer with 1000 W maximum power output.
  • Flat metal enclosure for low vibration and compact installation.
  • Integrated MOSFET power ampelävämpi.
  • High-level and low-level (RCA) inputs for versatile connection options.
  • Wired remote control for convenient bass level adjustment.

Komponentin tunnistus:

Peiying NB-3000 Active Car Subwoofer
Kuva 1: Peiying NB-3000 Active Car Subwoofer. This image displays the overall design of the subwoofer, including the speaker grille and the control panel located on one side.
Peiying NB-3000 Subwoofer Control Panel
Kuva 2: Control Panel and Connections. This close-up view shows the various inputs and controls: PHASE switch, FREQ (frequency) knob, REMOTE port, MIN/MAX GAIN knob, CH1/CH2 RCA inputs, POWER/PROTECT indicators, and the POWER/HIGH LEVEL INPUT terminal.
Peiying NB-3000 Wired Remote Control
Kuva 3: Wired Remote Control. This image shows the external wired remote control unit, featuring a power indicator light and a rotary knob for adjusting the subwoofer's output level (MIN/MAX).

4. Asennus ja asennus

Proper installation is crucial for optimal performance and safety. If you are not confident in performing the installation yourself, please seek professional assistance.

4.1. sijoitus

The compact design of the NB-3000 allows for flexible placement. Common locations include:

  • Under a car seat (ensure adequate clearance and ventilation).
  • Tavaratilassa.
  • Behind a rear seat.

Secure the subwoofer firmly to prevent it from moving during vehicle operation. Use mounting brackets or straps if provided or necessary.

4.2. Johdotusliitännät

Before making any connections, ensure the vehicle's battery negative terminal is disconnected.

  1. Virtaliitäntä (BATT+): Connect a suitable gauge power cable (e.g., 8 AWG or 10 AWG, depending on cable length and power requirements) directly from the vehicle's positive battery terminal to the "POWER" terminal on the subwoofer's high-level input connector. Install an in-line fuse (e.g., 20A-30A) within 18 inches (45 cm) of the battery.
  2. Maadoitus (GND): Connect a short, heavy gauge ground cable (same gauge as power cable) from the "GND" terminal on the subwoofer's high-level input connector to a clean, unpainted metal surface of the vehicle chassis. Ensure a good electrical contact.
  3. Kauko-ohjaus (REM): Connect a remote turn-on wire from your car stereo's remote output (usually a blue/white wire) to the "REM" terminal on the subwoofer's high-level input connector. This wire tells the subwoofer to turn on and off with your car stereo. If your stereo does not have a remote output, you may need to use an ignition-switched 12V source.
  4. Äänitulo:
    • Matalatasoinen tulo (RCA): If your car stereo has RCA pre-outs, connect RCA cables from the stereo's subwoofer or rear pre-outs to the "CH1" and "CH2" RCA inputs on the subwoofer.
    • Korkean tason syöttö: If your car stereo does not have RCA pre-outs, connect the speaker wires from your stereo's rear speakers to the "HIGH LEVEL INPUT" terminals on the subwoofer's connector. Ensure correct polarity (+ to + and - to -).
  5. Tason kaukosäätö: Connect the wired remote control cable to the "REMOTE" port on the subwoofer's control panel. Mount the remote control in a convenient location for the driver.

Kun kaikki liitännät on tehty, kytke ajoneuvon akun negatiivinen napa takaisin.

5. Käyttöohjeet

Once installed, you can adjust the subwoofer's settings for optimal sound.

5.1. Ensimmäinen käynnistys

Turn on your car stereo. The "POWER" indicator light on the subwoofer's control panel should illuminate (green). If the "PROTECT" light (red) illuminates, there may be a wiring issue or fault. Refer to the Troubleshooting section.

5.2. Säätösäätimet

  • VAHVISTUS (MIN/MAX): This knob controls the input sensitivity. Start with the GAIN set to minimum (MIN). Play music with a moderate bass level. Slowly increase the GAIN until the bass output blends well with your main speakers without distortion. Avoid setting the GAIN too high, as this can cause distortion and damage.
  • FREQ (taajuus): This knob adjusts the low-pass filter (LPF) crossover frequency, typically from 50Hz to 160Hz. The LPF ensures that only low frequencies are sent to the subwoofer. Adjust this to blend smoothly with your main speakers. A common starting point is around 80-100Hz.
  • VAIHE (0°/180°): This switch adjusts the phase of the subwoofer's output relative to your main speakers. Listen to music with strong bass and switch between 0° and 180°. Choose the setting that provides the most impactful and cohesive bass response.
  • REMOTE (Level Control): The wired remote control allows you to conveniently adjust the subwoofer's output level from the driver's seat without accessing the main unit.

6. Huolto

The Peiying NB-3000 requires minimal maintenance.

  • Pidä laite puhtaana pyyhkimällä se pehmeällä, kuivalla liinalla. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
  • Tarkista säännöllisesti kaikki johtoliitännät varmistaaksesi, että ne ovat tukevasti kiinni ja että niissä ei ole korroosiota.
  • Ensure the area around the subwoofer is clear to allow for proper ventilation.

7. Vianmääritys

If you experience problems with your subwoofer, refer to the following troubleshooting guide.

OngelmaMahdollinen syyRatkaisu
No power / No sound
  • Palanut sulake.
  • Loose power or ground connection.
  • Kauko-ohjausjohtoa ei ole kytketty tai se ei vastaanota signaalia.
  • Ei äänitulosignaalia.
  • Tarkista sulake ja vaihda se tarvittaessa (käytä oikean arvoista sulaketta).
  • Varmista, että kaikki virta-, maadoitus- ja etäliitännät ovat kunnossa.
  • Check remote wire connection and ensure car stereo is on.
  • Check RCA or high-level input connections. Ensure stereo output is active.
Vääristynyt ääni
  • GAIN on asetettu liian korkealle.
  • Incorrect FREQ setting.
  • Huono äänilähteen laatu.
  • Loose speaker wires (high-level input).
  • Reduce GAIN level.
  • Adjust FREQ knob for a smoother blend.
  • Kokeile toista äänilähdettä.
  • Check high-level input connections for proper polarity and secure fit.
Subwoofer sammuu ajoittain
  • Overheating (PROTECT light on).
  • Loose power/ground connections.
  • Alhainen tilavuustage.
  • Ensure adequate ventilation around the unit. Reduce GAIN.
  • Check and secure all power and ground connections.
  • Verify vehicle's electrical system is functioning correctly.
Heikko tai ei lainkaan bassoa
  • GAIN set too low.
  • Incorrect PHASE setting.
  • Incorrect FREQ setting.
  • RCA cables faulty or disconnected.
  • Increase GAIN level.
  • Toggle PHASE switch (0°/180°) to find the best setting.
  • Adjust FREQ knob.
  • Check RCA cable connections and try a different cable if suspected faulty.

8. Tekniset tiedot

The following are the technical specifications for the Peiying NB-3000 Active Car Subwoofer:

Mallin nimiNB-3000
Kaiuttimen tyyppiAktiivinen subwoofer
Kaiuttimen koko20 cm (8 tuumaa)
Suurin lähtöteho1000 wattia
Ampelävämpi tyyppiMOSFET
TaajuusvasteAdjustable via LPF (50Hz - 160Hz)
TuloherkkyysAdjustable (GAIN)
Vaiheen ohjaus0° / 180° kytkettävissä
TulotRCA (Low-Level), High-Level Speaker Input
ValvontamenetelmäLangallinen kaukosäädin
Virtalähde12 V:n tasavirta-auton akku
MateriaaliMetallikotelo
Mitat (P x L x K)35 cm x 23.5 cm x 7 cm (13.78 x 9.25 x 2.76 tuumaa)
Paino5 kg (11 lbs)

9. Takuu ja tuki

The Peiying NB-3000 Active Car Subwoofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or service inquiries, please contact the authorized Peiying dealer or the point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.