VOLTCRAFT PPS-13610 Laboratoriovirtalähteen käyttöohje

1. Johdanto

This manual provides comprehensive instructions for the safe and efficient operation of your VOLTCRAFT PPS-13610 Laboratory Power Supply. This device is designed as a potential-free DC voltage source for various laboratory and educational applications. It features adjustable voltage and current outputs, programmable memory locations, and remote control capabilities via USB.

Lue tämä käyttöohje huolellisesti ennen laitteen käyttöä ja säilytä se myöhempää tarvetta varten.

2. Turvallisuusohjeet

• Always operate the power supply indoors in a dry, well-ventilated area.
• Varmista, että virtalähde on kytketty oikein maadoitettuun pistorasiaan.
• Älä altista laitetta kosteudelle, sateelle tai äärimmäisille lämpötiloille.
• Vältä tuuletusaukkojen tukkimista ylikuumenemisen estämiseksi.
• Älä yritä avata c:täasing or modify the device. Refer all servicing to qualified personnel.
• Before making any connections or disconnections, ensure the power supply is turned off.
• Use appropriate safety connectors and cables for all connections.
• Be aware of the maximum current ratings for the front (5A) and rear (20A) output terminals.

3. Tuote ohiview

The VOLTCRAFT PPS-13610 features a clear digital display and intuitive controls for precise voltage and current adjustments. Below are descriptions of the front and rear panels.

3.1 Etupaneeli

Kuva: Edessä view of the VOLTCRAFT PPS-13610 power supply, showing the digital display, voltage and current adjustment knobs, power switch, and auxiliary output terminals.

• Digitaalinen näyttö: Näyttää reaaliaikaisen äänenvoimakkuudentage (V) and current (A) output, along with C.V. (Constant Voltage) and C.C. (Constant Current) indicators.
• Voitage Säätönuppi: Käytetään lähtöäänenvoimakkuuden asettamiseentage. Features both fine and coarse adjustment.
• Virran säätönuppi: Used to set the maximum allowable output current. Features both fine and coarse adjustment.
• Virtakytkin: Laitteen päävirransäätö.
• Auxiliary Output (5A Max): Front terminals for connecting loads requiring up to 5 Amperes. These are 4 mm safety connectors.
• Rear Control Indicator: Illuminates when the unit is being controlled remotely.

3.2 Takapaneeli

Kuva: Takaosa view of the VOLTCRAFT PPS-13610 power supply, showing the main output terminals, cooling fan, power input, USB port, and remote control port.

• Pääteho: Clamp connections for high current applications, supporting the full rated current (up to 20A).
• Tuuletin: Ensures proper thermal management of the unit.
• Verkkovirta: Standard IEC C14 inlet for connecting the main power cable.
• USB-portti: For connecting to a computer for remote control and programming.
• Kaukosäätimen portti: For external remote control connections.
• Tilakytkin: Selects between Normal, Preset, and Remote Control modes.
• Recall Buttons (P1, P2, P3): For recalling saved voltage ja nykyiset asetukset.

4. Asennus

1. Purkaminen: Carefully remove the power supply from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
2. Sijoitus: Place the unit on a stable, level surface. Ensure adequate clearance around the cooling fan and ventilation openings for proper airflow. Avoid direct sunlight, heat sources, and areas with excessive dust or humidity.
3. Virtaliitäntä:
   • Ensure the power switch on the front panel is in the 'OFF' (O) position.
   • Connect the provided AC power cord to the AC Power Input on the rear panel and then to a suitable grounded electrical outlet (100-240V~, 50/60Hz).
4. Lähtöliitännät:
   • For loads requiring up to 5A, use the 4mm safety connectors on the front panel.
   • For loads requiring higher currents (up to 20A), use the clamp connections on the rear panel. Ensure connections are secure.
   • Always observe correct polarity (+ to + and - to -) when connecting your load.

5. Käyttöohjeet

5.1 Peruskäyttö

1. Virta päälle: Flip the power switch on the front panel to the 'ON' (I) position. The digital display will illuminate.
2. Asetus Voltage:
   • Kierrä Voitage Säätönuppi halutun lähtöäänenvoimakkuuden asettamiseksitage.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
3. Virtarajan asettaminen:
   • Kierrä Virran säätönuppi to set the maximum allowable output current. This acts as a current limit.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
   • The current limit can be preset without a short circuit bridge.
4. Kytkentäkuorma: Halutun äänenvoimakkuuden asettamisen jälkeentage and current limit, connect your load to the appropriate output terminals (front or rear).
5. Valvontalähtö: The digital display shows the actual output voltage ja nykyinen.
   • The CV-osoitin illuminates when the power supply is operating in Constant Voltage mode (output voltage is stable at the set value).
   • The CC-osoitin illuminates when the power supply is operating in Constant Current mode (output current is stable at the set limit, typically when the load resistance is too low for the set voltagja).
6. Virta pois: Disconnect the load, then flip the power switch to the 'OFF' (O) position.

5.2 Using Preset Memory Locations

The PPS-13610 allows you to save and recall three different voltage and current limit settings.

1. Aseta haluamasi voltage and current limit using the respective adjustment knobs.
2. To save, refer to the specific instructions in the full product manual (not provided in detail here).
3. To recall a saved setting, use the P1, P2, or P3 buttons on the rear panel (ensure the Mode switch is set to 'Preset').

6. Remote Control and Programmable Features

The power supply can be controlled remotely via a USB connection to a computer, enabling advanced programmable functions.

1. USB-liitäntä: Connect the power supply to your computer using a standard USB cable via the USB port on the rear panel.
2. Ohjelmiston asennus: Install the included software on your computer. Refer to the software's documentation for installation and usage instructions.
3. Tilan valinta: Set the 'Mode' switch on the rear panel to 'Remote Ctrl' for computer control. The 'Rear Control' indicator on the front panel will illuminate.
4. Cyclic Workflows: The software allows you to program up to 20 different voltage and current sets with varying time periods. These workflows can be repeated up to 999 times, ideal for automated testing and experimental setups.

7. Huolto

• Puhdistus: Irrota virtajohto pistorasiasta ennen puhdistamista. Pyyhi ulkopinta pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Ilmanvaihto: Tarkista säännöllisesti, että jäähdytystuuletin ja tuuletusaukot ovat pölyttömiä ja vapaina tukoksista.
• Sulakkeen vaihto: If the unit fails to power on, the fuse may need replacement.
  • Ensure the power supply is completely disconnected from the mains.
  • Locate the fuse holder near the AC power input on the rear panel.
  • Replace the fuse with one of the same type and rating: T6AL250V.

8. Vianmääritys

9. Tekniset tiedot

10. Takuu ja tuki

For warranty information and technical support, please refer to the documentation provided with your purchase or contact VOLTCRAFT customer service directly. Details can typically be found on the manufacturer's official websivuston kautta tai ostopaikkasi kautta.

Valmistaja: VOLTCRAFT