Thermaltake TR2 600W ATX 12 V2.3 Power Supply User Manual

1. Johdanto

The Thermaltake TR2 600W ATX 12 V2.3 Power Supply is designed to provide stable and continuous power for computer systems. This power supply incorporates essential protections such as over-voltage, over-power, and short-circuit safeguards to ensure system safety. It features cable management optimized cables for improved thermal efficiency and a large 120mm fan with intelligent thermal control for quiet operation.

2. Turvallisuustiedot

VAROITUS: Vaarallinen tilavuustages are contained within this power supply. This unit is not user-serviceable. Do not attempt to open the power supply casing. Return to a service center for repair if necessary.

• Varmista, että virtalähde on irrotettu päävirtalähteestä ennen asennusta tai huoltoa.
• Do not operate the power supply in high humidity or extreme temperature environments.
• Verify that your system's power requirements do not exceed the power supply's maximum output.
• Utilize proper grounding procedures during installation to prevent electrical hazards.

3. Pakkauksen sisältö

Kun avaat paketin, varmista, että kaikki seuraavat osat ovat mukana:

• Thermaltake TR2 600W Power Supply Unit
• AC virtajohto
• Kiinnitysruuvit
• Käyttöopas (tämä asiakirja)

Figure 3.1: Thermaltake TR2 600W Power Supply and included accessories.

4. Asennus ja asennus

Follow these steps to properly install your Thermaltake TR2 600W Power Supply into your computer case.

4.1. Fyysinen asennus

1. Varmista, että tietokoneesi on sammutettu ja irrotettu pistorasiasta.
2. Avaa tietokoneen kotelo päästäksesi käsiksi virtalähdepaikkaan.
3. Carefully slide the Thermaltake TR2 600W Power Supply into the designated bay.
4. Kohdista virtalähteen ruuvinreiät kotelon reikiin.
5. Kiinnitä virtalähde koteloon mukana toimitetuilla kiinnitysruuveilla.

Figure 4.1: The Thermaltake TR2 600W Power Supply mounted in a PC case.

4.2. Kaapelien hallinta

The TR2 600W power supply features elongated cables designed for optimal routing, which helps improve airflow and overall thermal efficiency within your computer case. Route cables neatly to avoid obstructing airflow.

Kuva 4.2: Päättynytview of the power supply cables.

4.3. Connecting to Motherboard and Peripherals

Connect the power supply cables to your motherboard and other components. Refer to your motherboard and component manuals for specific connector locations.

• Main ATX Power: Connect the 20+4 pin ATX connector to the corresponding port on your motherboard.
• Prosessorin teho: Connect the 4-pin or 8-pin (if applicable) CPU power connector to the motherboard.
• PCIe-virta: For graphics cards requiring additional power, connect the 6-pin or 8-pin PCIe connectors.
• SATA teho: Liitä SATA-virtakaapelit SSD-levyihin, kiintolevyihin ja optisiin asemiin.
• Molex Power: Connect Molex power cables to older peripherals or case fans if needed.

5. Käyttöohjeet

After successful installation, ensure all connections are secure. Plug the AC power cord into the power supply and then into a wall outlet. Flip the power switch on the back of the power supply to the 'ON' position. You can then power on your computer system.

• Intelligent 120mm Cooling Fan: The integrated 120mm fan features intelligent thermal control, automatically adjusting its speed based on system load. This ensures efficient cooling during intensive tasks and maintains quiet operation during lighter activities.
• Power Protections: The power supply is equipped with over-voltage protection (OVP), over-power protection (OPP), and short-circuit protection (SCP) to safeguard your components from electrical anomalies.

6. Huolto

Säännöllinen huolto auttaa varmistamaan virtalähteesi pitkän käyttöiän ja optimaalisen suorituskyvyn.

• Pölynpoisto: Periodically clean the power supply's fan and vents to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for best results.
• Ilmavirta: Ensure that the computer case has adequate airflow and that the power supply's intake and exhaust vents are not blocked.
• Kaapelin tarkistus: Occasionally check all power connections to ensure they remain secure and free from damage.

Kuva 6.1: Yläosa view of the power supply, highlighting the 120mm cooling fan.

7. Vianmääritys

Jos virtalähteessäsi on ongelmia, noudata seuraavia yleisiä vianmääritysohjeita:

• Ei virtaa:
  • Varmista, että verkkojohto on kytketty kunnolla sekä virtalähteeseen että pistorasiaan.
  • Verify that the power switch on the back of the power supply is in the 'ON' position.
  • Check all internal power connections (20+4 pin ATX, CPU, PCIe) to ensure they are firmly seated.
  • Testaa pistorasiaa toisella laitteella varmistaaksesi, että se saa virtaa.
• Järjestelmän epävakaus/satunnaiset sammutukset:
  • Ensure your system's power draw does not exceed the power supply's capacity.
  • Check for proper ventilation and ensure the power supply fan is operating correctly.
  • Verify that all power connectors are properly seated.
• Kova tuulettimen ääni:
  • Clean the fan and vents to remove any dust buildup.
  • Ensure the power supply is not under excessive load, which can cause the fan to spin faster.

If problems persist after following these steps, contact Thermaltake customer support for further assistance.

8. Tekniset tiedot

Key technical specifications for the Thermaltake TR2 600W Power Supply:

Figure 8.1: Product label displaying electrical specifications and certifications.

9. Takuu ja tuki

The Thermaltake TR2 600W Power Supply comes with a manufacturer-backed 5 vuoden takuu, ensuring peace of mind regarding its reliability and performance.

For technical support or warranty inquiries, please contact Thermaltake customer service:

• Tukipalvelu: 1-800-988-1088
• Sähköposti: support@thermaltakeusa.com
• Websivusto: www.thermaltakeusa.com/warranty