1. Johdanto
This user manual provides essential information for the proper understanding, installation, adjustment, and maintenance of your Ohlins S46ER1 Front Suspension unit. To ensure optimal performance and safety, please read this manual thoroughly before installation and operation. Professional installation by a qualified technician is highly recommended.
2. Tuote ohiview
The Ohlins S46ER1 Front Suspension (Model BM216) is specifically designed for the BMW R1150GS (ADVENTURE 02-04) motorcycle. This high-performance front shock absorber is engineered to enhance ride comfort, stability, and handling characteristics.
Figure 2.1: Ohlins S46ER1 Front Suspension (Model BM216). This image displays the complete shock absorber assembly, highlighting its robust construction and distinctive yellow spring.
Tärkeimmät ominaisuudet:
- Extension Side Attenuation Adjustment Function: Equipped for fine-tuning rebound damping.
- Pressure Side Attenuation Adjustment Function: Not equipped on this model.
- Preload Adjustment Function: Stepless Screw Type for precise spring preload adjustments.
- Piston Diameter: 1.8 tuumaa (46 mm).
- Front Suspension Tank: Not equipped (No external reservoir).
- Sovellus: Specifically designed for BMW R1150GS (ADVENTURE 02-04).
3. Asennus ja asennus
Proper installation is crucial for the safety and performance of your motorcycle. It is strongly recommended that the Ohlins front suspension be installed by an authorized Ohlins service center or a qualified motorcycle technician.
Yleisiä asennusohjeita:
- Ensure the motorcycle is securely supported on a stand.
- Refer to your motorcycle's service manual for specific torque specifications and procedures for removing and installing suspension components.
- Inspect all mounting points and fasteners for wear or damage. Replace as necessary.
- Ensure proper clearance for all suspension components throughout the full range of travel.
- After installation, perform a thorough check of all tightened fasteners and verify proper function before riding.
4. Käyttö ja säätö
The Ohlins S46ER1 suspension allows for adjustments to optimize your riding experience. Understanding and correctly utilizing these adjustments will significantly impact your motorcycle's handling and comfort.
Adjustment Functions:
- Extension Side Attenuation (Rebound Damping):
This adjustment controls the speed at which the shock absorber extends after being compressed. Adjusting rebound damping affects how quickly the wheel returns to the road surface after hitting a bump. Turn the adjuster clockwise for slower rebound and counter-clockwise for faster rebound. Refer to the specific Ohlins setup guide for your model for recommended settings.
- Preload Adjustment (Stepless Screw Type):
Spring preload determines the initial compression of the spring and thus the ride height and sag of the motorcycle. The stepless screw type allows for precise adjustments. Increasing preload will raise the ride height and reduce sag, while decreasing preload will lower the ride height and increase sag. Always adjust preload with the motorcycle on a stand, ensuring the wheel is off the ground.
Note: This model does not feature Pressure Side Attenuation (Compression Damping) adjustment.
5. Huolto
Regular maintenance is essential to ensure the longevity and consistent performance of your Ohlins suspension unit. Adhere to the following guidelines:
- Puhdistus: Keep the shock absorber clean from dirt, dust, and road grime. Use mild soap and water, then rinse thoroughly. Avoid high-pressure washers directly on seals.
- Tarkastus: Periodically inspect the shock for any signs of oil leaks, damage to the shaft, spring, or mounting points. Check for loose fasteners.
- Huoltovälit: Ohlins recommends regular servicing by an authorized service center. Consult your Ohlins dealer or the official Ohlins website for recommended service intervals based on your riding conditions and mileage.
- Varastointi: If storing the motorcycle for an extended period, ensure the suspension is clean and dry.
6. Vianmääritys
This section provides basic troubleshooting steps for common issues. For complex problems or issues not listed here, contact an authorized Ohlins service center.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Excessive Sag / Bottoming Out | Insufficient spring preload. | Increase spring preload using the stepless screw type adjuster. |
| Harsh Ride / Bumpy Feel | Liian paljon palautusta damping. | Decrease extension side attenuation (rebound damping). |
| Bouncy Ride / Lack of Control | Liian vähän palautusta damping. | Increase extension side attenuation (rebound damping). |
| Öljyvuodot | Damaged seal or internal component. | Immediately cease use and contact an authorized Ohlins service center for inspection and repair. |
7. Tekniset tiedot
| Erittely | Yksityiskohta |
|---|---|
| Valmistaja | OHLINS |
| Merkki | Ohlins |
| Tuotteen mallinumero | BM216 |
| Valmistajan osanumero | BM216 |
| asema | Edessä |
| Tuotteen paino | 3.2 kg |
| Pakkauksen mitat | 57.8 x 23.2 x 11.6 cm |
| Männän halkaisija | 46 mm (1.8 tuumaa) |
| Attenuation Adjustment | Extension Side (Rebound) - Equipped |
| Esikuormituksen säätö | Stepless Screw Type |
| Sovellus | BMW R1150GS (ADVENTURE 02-04) |
8. Takuu ja tuki
Ohlins products are manufactured to the highest standards and come with a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Ohlins websivusto.
For technical support, service, or genuine Ohlins spare parts, please contact your authorized Ohlins dealer or service center. Providing your product's model number (BM216) and serial number (if applicable) will assist in faster service.
You can find more information and locate authorized service centers via the official Ohlins websivusto: www.ohlins.com