STANLEY FATMAX 1-95-152

STANLEY FATMAX 1-95-152 Alumiinipolttimen käyttöohje

Malli: 1-95-152

Johdanto

This manual provides essential instructions for the safe and effective use, setup, and maintenance of your STANLEY FATMAX 1-95-152 Aluminium Torch. Please read this manual thoroughly before operating the device and retain it for future reference.

Turvallisuustiedot

  • Älä katso suoraan LED-valoon.
  • Pidä poissa lasten ulottuvilta.
  • Älä sekoita vanhoja ja uusia paristoja tai erityyppisiä paristoja.
  • Remove batteries if the torch will not be used for an extended period.
  • Hävitä paristot paikallisten määräysten mukaisesti.
  • Do not attempt to disassemble or modify the torch.

Pakkauksen sisältö

  • STANLEY FATMAX Aluminium Torch
  • Requires 3 x AAA Alkaline Batteries (not included)

Asennus

Akun asennus

  1. Unscrew the tail cap of the torch by turning it counter-clockwise.
  2. Insert three (3) AAA alkaline batteries into the battery holder, ensuring correct polarity (+/-).
  3. Place the battery holder with the installed batteries into the torch body.
  4. Kierrä takakansi takaisin myötäpäivään, kunnes se on tiukasti kiinni.
Stanley Fatmax 3AAA Aluminium Torch with tail cap and lanyard
Image 1: Stanley Fatmax 3AAA Aluminium Torch. The tail cap, where batteries are inserted, is visible on the right.

Käyttöohjeet

Kytkeminen päälle/pois

Press the button located on the tail cap to turn the torch on. Press the button again to turn the torch off.

Säteen säätäminen

The head of the torch can be rotated to adjust the focus of the light beam. Rotate the head clockwise or counter-clockwise to achieve a wider floodlight or a more focused spotlight.

Stanley Fatmax 3AAA Aluminium Torch with yellow rings and lanyard
Image 2: The Stanley Fatmax torch, showing its robust aluminum body and textured grip for secure handling during operation.

Huolto

Puhdistus

Wipe the torch body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the lens is clean for optimal light output.

Akun vaihto

When the light output diminishes, replace the AAA batteries following the installation steps in the "Setup" section. Always replace all three batteries at the same time with new, fresh alkaline batteries.

Varastointi

Store the torch in a cool, dry place. If storing for an extended period, remove the batteries to prevent leakage and potential damage to the torch.

Vianetsintä

  • Torch does not turn on:
    • Tarkista, että paristot on asetettu oikein päin ja että napaisuus on oikea.
    • Varmista, että paristot ovat tuoreita eivätkä tyhjentyneet.
    • Varmista, että takakansi on tiukasti kiristetty.
  • Valo on himmeä tai välkkyy:
    • Vaihda paristot uusiin.
    • Clean battery contacts and terminals.
    • Varmista, että linssi on puhdas.
  • Palkin säätö on jäykkä:
    • Gently clean any debris from the head mechanism.
    • Avoid forcing the adjustment.

Tekniset tiedot

OminaisuusYksityiskohta
Mallinumero1-95-152
MateriaaliAlumiini
VirtalähdeParistokäyttöinen
Akun tyyppi3 x AAA-alkaliparistoa (eivät sisälly toimitukseen)
Voitage4.5 volttia
PolttimotyyppiLED
Kirkkaus120 lumenia
Tuotteen mitat12 x 4 x 22 cm (noin)
Tuotteen paino140 g
ErikoisominaisuudetDurable, Textured handle, Shatter resistant lens

Takuu ja tuki

For warranty information or technical support, please refer to the official STANLEY FATMAX websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Säilytä ostokuitti ostotodistuksena.

© 2023 STANLEY FATMAX. Kaikki oikeudet pidätetään.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.