Intermatic TN111CL Lamp & Appliance Timer User Manual

1. Johdanto

This manual provides instructions for the safe and efficient operation of your Intermatic TN111CL Lamp & Appliance Timer. Please read these instructions thoroughly before using the device and retain them for future reference. The TN111CL timer is designed to automatically turn lamps and appliances ON and OFF at preset times, offering convenience and energy management.

2. Turvallisuusohjeet

• Vain sisäkäyttöön: This timer is intended for indoor use in dry locations. Do not expose to rain or moisture.
• Sähköinen luokitus: Do not exceed the electrical ratings of the timer. Refer to the 'Specifications' section for details. Overloading the timer can cause overheating and fire.
• Maadoitus: Ensure the timer is plugged into a properly grounded outlet.
• Lapset: Pitää poissa lasten ulottuvilta. Tämä ei ole lelu.
• Puhdistus: Unplug the timer from the wall outlet before cleaning. Use a dry cloth; do not use liquid cleaners.
• Korjaukset: Do not attempt to repair or disassemble the timer. Refer all servicing to qualified service personnel.

3. Tuote ohiview

The Intermatic TN111CL is a mechanical timer featuring an easy-set dial for scheduling ON/OFF operations. It is designed for use with various lamps and small appliances.

Tärkeimmät ominaisuudet:

• 2 ON/OFF settings per 24-hour period.
• Easy-Set Dial for simple programming.
• Minimum ON/OFF time: 1/2 hour.
• Maximum ON/OFF time: 23 1/2 hours.

Tuotekaavio:

Kuva 1: Etuosa view of the Intermatic TN111CL Lamp & Appliance Timer, showing the central dial and outlet.

4. Asennus

1. Kytke ajastin: Kytke ajastin tavalliseen 125 V:n vaihtovirtapistorasiaan.
2. Aseta nykyinen aika: Rotate the entire dial clockwise until the current time aligns with the arrow indicator on the timer's face. The dial is marked in 15-minute increments. Ensure you distinguish between AM and PM hours (e.g., 3 PM is 15:00 on a 24-hour clock).
3. Pistokelaite: Kytke lamp or appliance you wish to control into the outlet on the side of the timer. Ensure the appliance's power switch is in the ON position.

5. Käyttöohjeet

The TN111CL timer uses a series of pins around the dial to set ON and OFF times.

1. Tunnista Pinsit: The dial has segments that can be pushed inwards or pulled outwards. Each segment represents 15 minutes.
2. Aseta käynnistysaika: To set a period when the appliance should be ON, push the corresponding segments (pins) inwards. For example, if you want the appliance ON from 6:00 PM to 10:00 PM, push in all the pins between the 18:00 and 22:00 marks on the dial.
3. Aseta poiskytkentäaika: To set a period when the appliance should be OFF, pull the corresponding segments (pins) outwards. These are the default positions for the pins.
4. Manuaalinen ohitus: The timer typically has a manual override switch (often a small slider or button) that allows you to turn the connected appliance ON or OFF independently of the timer settings. Refer to the markings on your specific unit for its location and function (e.g., 'Timer ON', 'Timer OFF', 'Always ON').

The timer will cycle through the programmed ON/OFF settings daily. The minimum ON or OFF duration is 30 minutes (two 15-minute segments).

6. Huolto

• Puhdistus: To clean the timer, unplug it from the wall outlet. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
• Varastointi: If storing the timer for an extended period, unplug it and keep it in a cool, dry place away from direct sunlight and extreme temperatures.
• Tarkastus: Periodically inspect the timer and its cord for any signs of damage, such as frayed wires or cracks. If damage is found, discontinue use and replace the unit.

7. Vianmääritys

• Laite ei käynnisty/sammu ohjelmoituina aikoina:
  • Ensure the timer is plugged firmly into a working outlet.
  • Verify the appliance plugged into the timer is switched to the ON position.
  • Check that the current time is correctly set on the dial.
  • Confirm that the ON/OFF pins are correctly pushed in (ON) or pulled out (OFF) for the desired times.
  • Check the manual override switch position.
• Timer makes a ticking sound:
  • This is normal for mechanical timers and indicates the internal clock mechanism is operating.
• Appliance remains ON or OFF constantly:
  • Check the manual override switch. It may be set to 'Always ON' or 'Always OFF'.
  • Re-verify the pin settings for your desired ON/OFF schedule.

8. Tekniset tiedot

9. Takuu ja tuki

Takuu:

This Intermatic TN111CL Lamp & Appliance Timer comes with a ELINIKÄINEN TAKUUSäilytä ostokuittisi takuuvaatimuksia varten.

Asiakastuki:

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support directly. Refer to the official Intermatic webKatso ajantasaisimmat yhteystiedot sivustolta tai tuotepakkauksesta.