Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Ominaisuudet

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Daily and Weekly Programming: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• LCD-näyttö: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• Asennusvaihtoehdot: Designed for DIN rail mounting or wall mounting using the included bracket.
• Läpinäkyvä suojakuori: Provides protection for the display and controls.

3. Asennus ja asennus

Varoitus: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Asennus

The E305DIN1 timer can be mounted in two ways:

• Asennus DIN-kiskoon: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• Seinäasennus: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Sähköliitäntä

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. Tarkista kaikkien liitäntöjen kireys ja oikeellisuus ennen virran kytkemistä takaisin päälle.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Käyttöohjeet

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Nykyisen kellonajan ja päivämäärän asettaminen

1. Paina KELLO -painiketta.
2. Pitämällä KELLO, paina PÄIVÄ -painiketta asettaaksesi nykyisen viikonpäivän.
3. Pitämällä KELLO, paina TUNNIN -painiketta asettaaksesi nykyisen tunnin.
4. Pitämällä KELLO, paina MIN -painiketta asettaaksesi nykyisen minuutin.

4.2 PÄÄLLE-/POIS-aikojen ohjelmointi

The timer allows for up to 8 ON/OFF program pairs.

1. Paina PROG button once to enter program mode. The display will show '1 ON'.
2. Käytä PÄIVÄ, TUNNIN, ja MIN buttons to set the desired ON time for program 1.
3. Paina PROG uudelleen. Näytössä näkyy '1 OFF'.
4. Käytä PÄIVÄ, TUNNIN, ja MIN buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. Paina KELLO button to exit program mode and return to normal operation.

4.3 Manuaalinen ohitustoiminto

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• Paina MANUAALINEN painiketta selataksesi tiloja:
• PÄÄLLÄ: The output is continuously ON, overriding any programmed OFF times.
• OFF: The output is continuously OFF, overriding any programmed ON times.
• AUTO: The timer operates according to the programmed ON/OFF schedules.

5. Huolto

The Perel E305DIN1 timer requires minimal maintenance.

• Puhdistus: Pyyhi ulkopinta pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Akun varmuuskopiointi: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outagakun voi olla tarpeen vaihtaa pätevällä teknikolla.
• Ympäristöolosuhteet: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Vianmääritys

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• Ajastin ei käynnisty/pois päältä ohjelmoinnin mukaisesti:
  • Tarkista, onko ajastin päällä AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• Näyttö on tyhjä tai välkkyvä:
  • Check the main power supply to the timer.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• Ajastimen asetukset menetetään virrankatkaisun jälkeentage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Jos nämä toimenpiteet eivät ratkaise ongelmaa, ota yhteyttä asiakastukeen.

7. Tekniset tiedot

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. Takuu ja tuki

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Säilytä ostokuittisi todisteena ostosta takuun voimassaoloa varten.