Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle Instruction Manual

1. Johdanto ja loppuview

The Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle is designed to provide safe and reliable electrical connections in residential and commercial environments. This receptacle complies with the 2011 National Electrical Code (NEC) Article 406.12, which mandates tamper-resistant receptacles in dwelling units to enhance safety, particularly for children.

Keskeisiä ominaisuuksia ovat:

• Tamper-kestävä muotoilu lisää turvallisuutta.
• Durable, impact-resistant thermoplastic face and back body.
• Decorator style for modern aesthetics.
• Easy installation with backed-out terminal screws and built-in wire stripper.

2. Turvallisuustiedot

VAROITUS: Risk of electric shock or electrocution. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. If you are unsure about any part of these instructions, consult a qualified electrician.

• Katkaise aina virta pääpaneelista ennen sähköjohtojen kanssa työskentelyä.
• Käytä asianmukaisia ​​henkilönsuojaimia, kuten eristettyjä käsineitä ja suojalaseja.
• Varmista, että kaikki johtoliitännät ovat tukevasti kiinni ja asianmukaisesti eristettyjä.
• Älä ylitä laitteen ilmoitettuja sähköarvoja.
• Tämä laite on tarkoitettu vain sisäkäyttöön.
• Comply with all local and national electrical codes.

3. Pakkauksen sisältö

The package contains one (1) Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle.

4. Asennus

Follow these steps for proper installation of your Eaton TR1107W receptacle:

1. Sammuta virta: Locate the circuit breaker or fuse that controls the power to the outlet where you will be installing the receptacle. Turn it OFF. Verify power is off using a voltage testaaja.
2. Irrota vanha pistorasia (jos sovellettavissa): Carefully remove the wallplate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
3. Valmistele johdot: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The receptacle features a built-in wire stripper for No.14 and No.12 wire to assist with this step.
4. Kytke johdot: The Eaton TR1107W receptacle supports side-wire connections and accepts up to No.10 solid wire. Terminal screws are backed out and ready for wiring.
   • Yhdistä vihreä tai paljas kuparinen maadoitusjohto to the green grounding screw.
   • Yhdistä valkoinen (nolla)johdin to the silver-colored terminal screws.
   • Yhdistä musta (kuuma) lanka to the brass-colored terminal screws.
   Varmista, että kaikki liitännät ovat tiukat ja tukevat.
5. Kiinnitysliitäntä: Carefully fold the wires into the electrical box. Insert the receptacle into the box and secure it with the mounting screws provided. The extra long and extra wide mounting straps aid in stable installation.
6. Asenna seinälevy: Attach a compatible decorator wallplate (not included) over the receptacle.
7. Palauta virta: Turn the power back ON at the circuit breaker or fuse box. Test the receptacle to ensure proper operation.

Kuva 1: Etuosa view of the Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle. This image highlights the decorator style and the two tamper-kestävät pistorasiat.

5. Käyttö

The Eaton TR1107W is a tamper-resistant receptacle. This means it has an internal shutter mechanism that prevents foreign objects from being inserted into the slots. To insert a plug, apply even pressure to both prongs simultaneously. This will open the shutters and allow the plug to enter. If a plug does not insert easily, ensure both prongs are aligned and apply firm, even pressure.

6. Huolto

The Eaton TR1107W receptacle requires minimal maintenance. Periodically inspect the receptacle and wallplate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the device immediately. Clean the surface with a soft, damp liinalla; vältä hankaavia puhdistusaineita tai liuottimia.

7. Vianmääritys

• No Power at Receptacle:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
  • Ensure all wire connections to the receptacle are secure. Turn off power before checking connections.
  • Test the receptacle with a known working appliance.
• Plug Difficult to Insert:
  • This is normal for tamper-resistant receptacles. Ensure both prongs of the plug are aligned and apply firm, even pressure simultaneously.
  • Do not force the plug, as this can damage the receptacle or the plug.
• Pistorasia on kuuma kosketettaessa:
  • Immediately disconnect power to the circuit. This could indicate an overload or a faulty connection. Consult a qualified electrician.

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information and technical support, please contact Eaton customer service directly. Refer to the official Eaton webKatso ajantasaisimmat yhteystiedot ja takuuehdot verkkosivustolta tai tuotepakkauksesta.

Eaton Websivusto: www.eaton.com