Johdanto
The CDN Dual Sensing Programmable Probe Thermometer and Timer (Model DSP1) is designed to accurately measure both the internal temperature of food and the ambient temperature of your oven or grill. This versatile tool assists in achieving precise cooking results and ensuring food safety. It features a durable stainless steel probe and cable, a clear digital display, and programmable alarms.
Kuva: Edessä view of the CDN DSP1 thermometer with probe attached, displaying oven and food temperatures.
Tärkeimmät ominaisuudet
- Dual Sensing Probe: Measures both food and oven/grill temperatures simultaneously.
- Laaja lämpötila-alue: 32 - 572 °F (0 - 300 °C).
- Ohjelmoitavat hälytykset: Set desired temperatures for food and oven; an alarm sounds when reached.
- Ajastintoiminto: Includes a 10-hour count up/down timer.
- Kestävä rakenne: 6.75-inch (17 cm) stainless steel probe with a 39-inch (1 m) sensor cable.
- Monipuolinen asennus: Features a magnet for metal surfaces and a fold-out stand for countertops.
- Yksikkövalinta: Vaihda helposti Fahrenheitin ja Celsiuksen välillä.
- Teho: Toimii yhdellä AAA-paristolla (mukana).
Asennus
- Akun asennus:
Locate the battery compartment on the back of the unit. Insert one AAA battery, ensuring correct polarity. The display will activate.
- Anturin liitäntä:
Insert the stainless steel probe's jack firmly into the port on the side of the thermometer unit.
Image: The CDN DSP1 thermometer with its probe securely plugged into the side port.
- Sijoitus:
Position the thermometer unit using either the magnetic back to attach it to a metal surface (e.g., oven door, refrigerator) or extend the fold-out stand for countertop use.
Kuva: Takaosa view of the CDN DSP1 thermometer, highlighting the integrated magnet and the fold-out stand for versatile placement.
Käyttöohjeet
Lämpötilan mittaus
- Aseta anturi: Carefully insert the tip of the probe into the thickest part of the food, avoiding bone or gristle. For oven temperature, position the probe tip within the oven cavity, ensuring the cable is not pinched.
- Virta päälle: Paina ON/OFF button to activate the thermometer.
- Valitse yksikkö: Paina °F/°C -painiketta vaihtaaksesi Fahrenheit- ja Celsius-näyttöjen välillä.
- Set Food Temperature Alarm:
- Paina MODE button until "FOOD" is selected.
- Paina LIHA button to cycle through pre-programmed meat types (e.g., Beef, Pork, Chicken) or press SARJA to manually adjust the target temperature using the HR ja MIN painikkeita.
- Paina ALERT ON/OFF to activate the alarm. The alarm will sound when the food reaches the set temperature.
- Set Oven Temperature Alarm:
- Paina MODE button until "OVEN" is selected.
- Paina SARJA to manually adjust the target oven temperature using the HR ja MIN painikkeita.
- Paina ALERT ON/OFF to activate the alarm. The alarm will sound when the oven reaches the set temperature.
Ajastintoiminto
- Valitse ajastintila: Paina MODE button until "TIMER" is selected.
- Aseta aika: Käytä HR ja MIN buttons to set the desired countdown time (up to 10 hours).
- Aloitus/lopetus: Paina START/STOP button to begin or pause the countdown.
- Palauta: To clear the timer, press and hold the START/STOP -painiketta.
Huolto
- Anturin puhdistus: Pyyhi ruostumattomasta teräksestä valmistettu anturi jokaisen käyttökerran jälkeenamp cloth and mild detergent. Rinse thoroughly and dry completely. Do not immerse the probe cable connector or the main unit in water.
- Laitteen puhdistus: Wipe the thermometer unit with a soft, damp liinalla. Älä käytä hankaavia puhdistusaineita äläkä upota laitetta veteen.
- Varastointi: Store the thermometer and probe in a clean, dry place when not in use. Ensure the probe cable is not kinked or damaged.
- Akun vaihto: Replace the AAA battery when the display becomes dim or unresponsive.
Image: The CDN DSP1 thermometer and its probe laid out on a wooden cutting board, ready for use or cleaning.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei näyttöä tai himmeä näyttö | Akku on vähissä tai tyhjä; akun virheellinen asennus. | Vaihda AAA-paristo varmistaen oikean napaisuuden. |
| Epätarkat lämpötilalukemat | Probe not fully inserted; probe or cable damage; probe tip touching bone/gristle. | Ensure probe is fully inserted into the thickest part of the food. Avoid bone. Inspect probe and cable for damage. If damaged, replace the probe. |
| Hälytys ei soi | Alarm function not activated; volume too low. | Paina ALERT ON/OFF button to activate. Check for any volume settings (if applicable, though this model typically has a fixed alarm). |
| Probe not registering temperature | Probe not properly connected to the unit. | Ensure the probe jack is firmly seated in the port. |
Tekniset tiedot
- Malli: DSP1
- Lämpötila-alue: 32 - 572 °F (0 - 300 °C)
- Anturin pituus: 6.75 tuumaa (17 cm)
- Kaapelin pituus: 39 tuumaa (1 m)
- Virtalähde: 1 x AAA paristo (mukana)
- Näyttötyyppi: Digitaalinen nestekidenäyttö
- Materiaalit: Acrylonitrile Butadiene Styrene (ABS) casing, Stainless Steel probe and cable
- Ominaisuudet: Dual sensing, programmable alarms, timer, magnet/stand mounting
- Mitat (yksikkö): Approximately 7.5 inches (H) x 3 inches (W) x 0.625 inches (D)
Image: The CDN DSP1 thermometer with key dimensions indicated, showing its compact size.
Takuutiedot
CDN products are manufactured with quality materials and craftsmanship. For specific warranty details and terms, please refer to the documentation included with your product or visit the official CDN websivusto. Säilytä ostokuitti ostotodistuksena mahdollisten takuuvaatimusten varalta.
Tukea
For further assistance, product inquiries, or technical support, please contact CDN customer service. Contact information can typically be found on the product packaging or the official CDN websivusto.
Valmistaja: CDN
Websivusto: www.cdn-timeandtemp.com
Puhelin: 800-338-5594