Johdanto
This manual provides instructions for the proper setup, operation, and maintenance of your Detecto Mechanical Pediatric Baby Scale, Model 450. Please read this manual thoroughly before using the scale to ensure accurate measurements and safe operation. Retain this manual for future reference.
Tärkeitä turvallisuustietoja
- Always place the scale on a firm, level, and stable surface to ensure accurate readings and prevent tipping.
- Älä koskaan jätä vauvaa vaa'alle ilman valvontaa.
- Ensure the baby tray is securely seated before placing an infant on it.
- Keep the scale clean and dry. Avoid exposing it to excessive moisture or extreme temperatures.
- Do not attempt to disassemble or repair the scale yourself. Refer to qualified service personnel.
- This scale is designed for weighing infants and small children within its specified capacity. Do not exceed the maximum weight capacity of 130 lbs (59 kg).
Pakkauksen sisältö
Varmista pakkauksesta purkamisen yhteydessä, että kaikki osat ovat mukana ja vahingoittumattomia:
- Detecto Mechanical Pediatric Baby Scale Base
- Weigh Beam Assembly
- Polystyrene Baby Tray
- Käyttöohje (tämä asiakirja)
Asennusohjeet
- Pura komponentit: Poista kaikki osat varovasti pakkauksesta.
- Place Scale Base: Position the scale base on a flat, stable, and level surface. Ensure there is adequate space around the scale for safe operation.
- Attach Weigh Beam: Securely attach the weigh beam assembly to the vertical support column on the scale base. Ensure it is firmly seated and stable.
- Install Baby Tray: Place the polystyrene baby tray onto the designated area on the scale base. The tray should fit snugly and securely, preventing any wobbling.
- Nolla mittakaava: Before first use and periodically, ensure the scale is properly zeroed. Adjust the tare weight knob (if present, typically on the weigh beam) until the weigh beam is balanced at the zero mark without any weight on the tray.
Figure 1: Fully assembled Detecto Mechanical Pediatric Baby Scale Model 450. Shows the base, weigh beam, and baby tray.
Käyttöohjeet
- Valmistele vaaka: Ensure the scale is on a stable surface and properly zeroed. If using a blanket or diaper, place it on the tray first and re-zero the scale to account for its weight.
- Place Infant: Carefully place the infant onto the center of the baby tray. Ensure the infant is calm and still for an accurate reading.
- Read Weight: Adjust the large and small weight poises on the weigh beam until the beam balances in the center. Read the weight indicated by the combined values of the poises. The scale measures in pounds and ounces.
- Measure Length (Optional): The integrated measuring tape on the baby tray allows for length measurement. Gently extend the infant and read the length directly from the tape.
- Remove Infant: Carefully remove the infant from the tray after recording the measurements.
Kuva 2: Lähikuva view of the weigh beam and poises, showing the weight markings and adjustment mechanism.
Huolto ja puhdistus
- Puhdistus: Wipe the scale and tray with a soft cloth dampened with a mild disinfectant solution after each use. Do not use abrasive cleaners or immerse the scale in water.
- Varastointi: Store the scale in a clean, dry place away from direct sunlight and extreme temperatures.
- Tarkastus: Periodically inspect the scale for any signs of wear or damage. Ensure all components are secure.
- Kalibrointi: Mechanical scales generally maintain accuracy well, but if you suspect inaccuracies, consult a qualified service technician for calibration.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Epätarkkoja lukemia | Scale not level; not zeroed; infant moving; foreign object on scale. | Ensure scale is on a level surface. Zero the scale before use. Wait for infant to be still. Check for debris. |
| Weigh beam does not balance | Poises not correctly positioned; scale overloaded. | Adjust poises carefully. Ensure weight is within capacity (max 130 lbs). |
| Tray wobbles | Tray not seated correctly. | Remove and re-seat the baby tray firmly onto the base. |
Tekniset tiedot
- Malli: 450
- Kapasiteetti: 130 lb x 1 unssia (60 kg x 20 g)
- Yksiköt: Puntaa (lb)
- Mittanauha: 0 to 21 in x 0.25 in / 0 to 53 cm x 0.1 cm
- Laatikon mitat: 22 tuumaa L x 14.75 tuumaa S x 4.5 tuumaa K (55.9 cm L x 37.5 cm S x 11.4 cm K)
- Rakenne: Powder-Painted Steel base, Polystyrene Tray
- Tuotteen mitat: 19 x 27 x 12 tuumaa (48.3 x 68.6 x 30.5 cm)
- Tuotteen paino: Noin 33 paunaa (15 kg)
- Näyttötyyppi: Analog (Weigh Beam)
Takuu ja tuki
Detecto products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Detecto website. For technical support, replacement parts, or service inquiries, please contact Detecto customer service.
Valmistaja: Detecto
Websivusto: www.detecto.com (Note: This is a placeholder link, please refer to official documentation for exact contact details.)
