AudioQuest NRG-Y2 virtakaapelin käyttöohje

1. Tuote ohiview

The AudioQuest NRG-Y2 Power Cable is designed to deliver clean and stable power to various electronic devices, enhancing their performance. It features a 1-meter length with a C7 connector for the device end and a 3-prong wall plug for the power source. This cable incorporates advanced technologies to minimize noise and distortion, ensuring optimal signal transfer.

• Long Grain Copper: Minimizes distortion caused by grain boundaries within the conductor.
• Semi-Solid Concentric Conductors: Strands are tightly packed and maintain position, reducing strand-interaction distortion.
• Silver-Plated Drain Wires: Direction-controlled shield conductors efficiently drain RF noise to ground.
• Noise-Dissipation Technology: Reduces interference for quieter backgrounds.

Image 1.1: The AudioQuest NRG-Y2 Power Cable, showcasing its robust design and connectors.

2. Asennusohjeet

Follow these steps to properly connect your AudioQuest NRG-Y2 Power Cable:

1. Tunnista liittimet: Locate the C7 connector (two-pin, figure-8 shape) and the 3-prong wall plug.
2. Yhdistä laitteeseen: Insert the C7 connector firmly into the corresponding power inlet on your electronic device (e.g., DAC, powered speaker, game console, streamer). Ensure it is fully seated.
3. Liitä pistorasiaan: Insert the 3-prong wall plug into a standard, grounded AC power outlet. Ensure the connection is secure.
4. Tarkista yhteys: Confirm both ends of the cable are securely connected before powering on your device.

Kuva 2.1: Yksityiskohtainen view of the C7 and 3-prong connectors for proper identification during setup.

3. Käyttöohjeet

The AudioQuest NRG-Y2 Power Cable operates passively by supplying power to your connected device. No specific operational steps are required for the cable itself beyond ensuring a secure and stable connection.

• Ensure the cable is not bent or kinked sharply, which could damage the internal conductors.
• Vältä raskaiden esineiden asettamista kaapelin päälle.
• Confirm that the power outlet is functioning correctly and provides the appropriate voltage laitteellesi.

4. Huolto

Proper maintenance ensures the longevity and optimal performance of your power cable:

• Puhdistus: Pyyhi kaapeli ja liittimet varovasti pehmeällä, kuivalla liinalla. Älä käytä nestemäisiä puhdistusaineita tai hankaavia aineita.
• Varastointi: When not in use, coil the cable loosely. Avoid tight coiling or sharp bends. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Tarkastus: Periodically inspect the cable for any signs of damage, such as cuts, fraying, or bent pins on the connectors. If damage is observed, discontinue use and replace the cable.

5. Vianmääritys

Jos kohtaat ongelmia, harkitse seuraavia vianmääritysvaiheita:

• Ei virtaa laitteelle:
  • Ensure both the C7 connector and the 3-prong wall plug are fully and securely inserted.
  • Test the power outlet with another device to confirm it is active.
  • Tarkista mahdolliset lauenneet katkaisijat.
• Jaksottainen teho:
  • Re-seat both connectors to ensure a firm connection.
  • Inspect the cable for any visible damage. A damaged cable may require replacement.

If problems persist after performing these steps, contact AudioQuest customer support for further assistance.

6. Tekniset tiedot

7. Takuutiedot

The AudioQuest NRG-Y2 Power Cable is covered by a manufacturer's warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official AudioQuest website or contact their customer service directly. Retain your proof of purchase for warranty validation.

8. Tukea

For additional assistance, technical support, or inquiries not covered in this manual, please visit the official AudioQuest website or contact their customer support team. You can typically find contact information and FAQs on their support pages.

AudioQuest Official Websivusto: www.audioquest.com