Westek 6043BC

Westek 6043BC Touch Pad Dimmer Instruction Manual

Model: 6043BC

Johdanto

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Tuotteen ominaisuudet

  • Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
  • Säädettävä kirkkaus: Offers three distinct light settings, ranging from a low night light to full brightness.
  • Kätevä muotoilu: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
  • Moderni tyyli: Features a contemporary black finish and sleek design that complements various home decors.
  • Helppo asennus: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Turvallisuustiedot

Please read and understand all instructions before installation and use. Retain this manual for future reference.

  • Vain sisäkäyttöön.
  • Älä ylitä enimmäiswattiatage of 200 Watts for incandescent bulbs.
  • Varmista, että lamp is unplugged from the wall outlet before installation.
  • Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
  • Do not use this dimmer control with another dimmer in the same circuit.
  • Pidä poissa vedestä ja kosteudesta.

Asennus ja asennus

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

  1. Valmista Lamp: Varmista lamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
  2. Kytke himmennin: Kytke lamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
  3. Liitä seinäpistorasiaan: Plug the dimmer unit into a standard wall outlet.
  4. Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.
Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Käyttöohjeet

Once installed, operate the dimmer as follows:

  1. Kytke päälle/säädä kirkkautta: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
  2. Sammuta: After the high brightness setting, touching the pad again will turn the lamp pois.
  3. Voima Outage: Virran ollessa kyseessätage, the dimmer may reset. Simply touch the pad to resume normal operation.

Huolto

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Vianetsintä

OngelmaMahdollinen syyRatkaisu
Lamp does not turn on or dim.
  • Lamp not properly plugged into dimmer.
  • Dimmer not properly plugged into wall outlet.
  • Lamp's internal switch is off.
  • Incompatible bulb (LED/CFL).
  • Viallinen polttimo.
  • Voimia sinulletage tai sulake on lauennut.
  • Varmista lamp cord is fully inserted into the dimmer.
  • Ensure dimmer is fully inserted into a working wall outlet.
  • Käännä lamp's original switch to the ON position.
  • Replace with a standard incandescent bulb (up to 200W).
  • Vaihda polttimo.
  • Check your home's power supply and circuit breakers.
Lamp flickers or buzzes.
  • Incompatible bulb (LED/CFL).
  • Löysä polttimon liitos.
  • Replace with a standard incandescent bulb (up to 200W).
  • Kiristä polttimo kantaansa.
Lamp turns on by itself occasionally.
  • Electrical interference (e.g., during thunderstorms, power fluctuations).
  • This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Tekniset tiedot

  • Malli: 6043 eaa
  • Merkki: Westek
  • Toimintatila: ON-NONE-OFF (3-level dimming)
  • Suurin wattitage: 200 Watts (Incandescent bulbs only)
  • Voitage: 120V, 60Hz
  • Valvontamenetelmä: Kosketa
  • Tuotteen mitat (P x L x K): 3.9 x 1 x 7.9 tuumaa
  • Tuotteen paino: 3.8 unssia
  • Materiaali: Multi (Brass contact material)
  • Väri: Musta
  • Vain sisäkäyttöön: Kyllä

Takuu ja tuki

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek websivustolla tai ota yhteyttä asiakaspalveluun.

Valmistaja: AmerTac

Asiakaspalvelu: 201.661.9945

Websivusto: www.amertac.com

© 2024 Westek. Kaikki oikeudet pidätetään.